Loading manual…
Loading manual…
Thank you for buying the MSI® Z270 GAMING PRO motherboard. Check to make sure your motherboard box contains the following items. If something is missing…
y The components included in this package are prone to damage from electrostatic discharge (ESD). Please adhere to the following instructions to ensure…
Intel® LGA 1151 CPU DDR4 Memory Graphics Card SATA Hard Disk Drive SATA DVD Drive A Package of Screws Phillips Screwdriver Chassis Power Supply Unit CPU Fan…
CPU y Supports 7th/6th Gen Intel® Core™ i3/i5/i7 processors, and Intel® Pentium® and Celeron® processors for Socket LGA1151 Chipset Intel® Z270 Chipset Memory…
PS/2 Port LAN USB 2.0 Audio Ports DVI-D USB 3.1 Gen1 USB 3.1 Gen2 USB 3.1 Gen1 USB 3.1 Gen2 Type-C Link/ Activity LED Status Description Off No link Yellow…
EZ Debug LEDs These LEDs indicate the status of key components during booting process. When an error is occurred, the corresponding LED stays lit until the…
The default settings offer the optimal performance for system stability in normal conditions. You should always keep the default settings to avoid possible…
Please download and update the latest utilities and drivers at www.msi.com Installing Windows® 7/ 8.1/ 10 1. Power on the computer. 2. Insert the Windows® 7/…
Below are the different types of a RAID. RAID 0 breaks the data into blocks which are written to separate hard drives. Spreading the hard drive I/O load across…
Before sending the motherboard for RMA repair, try to go over troubleshooting guide first to see if your got similar symptoms as mentioned below. The power is…
FCC Compliance Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC…
Fan connectors can be classified as PWM (Pulse Width Modulation) Mode or DC Mode. PWM Mode fan connectors provide constant 12V output and adjust fan speed with…
Introduction to the LGA 1151 CPU The surface of the LGA 1151 CPU has two notches and a golden triangle to assist in correctly lining up the CPU for motherboard…
There is CMOS memory onboard that is external powered from a battery located on the motherboard to save system configuration data. If you want to clear the…
This connector allows you to connect the chassis intrusion switch cable. Normal (default) Trigger the chassis intrusion event Using chassis intrusion detector…
This connector allows you to connect the optional serial port with bracket.
This connector allows you to connect the 5050 RGB LED strips. Important y This connector supports 5050 RGB multi-color LED strips (12V/G/R/B) with the maximum…
This connector allows you to connect the optional parallel port with bracket. 1 JLED1 5050 LED strip
This connector is for TPM (Trusted Platform Module). Please refer to the TPM security platform manual for more details and usages. JBAT1: Clear CMOS (Reset…
M2_1 M2_2 Installing M.2 module 1 2 3 30° 3. Tighten the base screw into the hole of the distance to the M.2 slot as the length your M.2 module. 4. Insert your…
PCI_E1: PCIe 3.0 x16 PCI_E2: PCIe 3.0 x1 PCI_E3: PCIe 3.0 x1 PCI_E4: PCIe 3.0 x8 PCI_E5: PCIe 3.0 x1 PCI_E6: PCIe 3.0 x4 x16 x8 x8 x8 x8 x4 Multiple graphics…
These connectors are SATA 6Gb/s interface ports. Each connector can connect to one SATA device. SATA1 SATA2 SATA3 SATA5 SATA6 SATA4 Important y The SATA1 /…