Samsung LH10DBDPLBC (LH10DBDPLBC/EN) user manual

Contents

1. Copyrightp. 6

   The contents of this manual are subject to change without notice to improve quality. © 2014 Samsung Electronics Samsung Electronics owns the copyright for this…

2. Safety Precautionsp. 7
3. Symbolsp. 7

   Warning A serious or fatal injury may result if instructions are not followed. Caution Personal injury or damage to properties may result if instructions are…

4. Cleaningp. 7

   ― ― Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. ― ― Take the following steps when cleaning. ― ― The following…

5. Storagep. 8

   Due to the characteristics of high-glossy products, using a UV humidifier nearby may create whitecolored stains on the product. ― ― Contact Customer Service…

6. Electricity and Safetyp. 8

   ― ― The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cord or…

7. Operationp. 11

   Warning Never disassemble, repair or modify the product yourself. • • A fire or electric shock may result. • • Contact Samsung Customer Service Center for…

8. Checking the Componentsp. 14

   Components ― ― Components may differ in different locations. Quick setup guide Warranty card (Not available in some locations) Regulatory guide Power cord DC…

9. Componentsp. 14

   are missing. -- The appearance of the components and items sold separately may differ from the image shown. Checking the Components Components ― ― Components…

10. Items sold separatelyp. 15

    The following items can be purchased at your nearest retailer. Wall-mount Kit LAN cable HDMI-DVI cable HDMI cable SD CARD

11. Partsp. 16

    Control Panel ― ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Buttons…

12. Control Panelp. 16

    ― ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Buttons Description Use…

13. Reverse Sidep. 17
14. Anti-theft Lockp. 18

    ― ― An anti-theft lock allows you to use the product securely even in public places. ― ― The locking device shape and locking method depend on the…

15. Remote Controlp. 19

    button functions may differ for different products. Remote Control ― ― Using other display devices in the same space as the remote control of this product can…

16. Ventilationp. 21

    Installation on a Perpendicular Wall A Minimum 40 mm B Ambient temperature: Under 35 C • • When installing the product on a perpendicular wall, allow at least…

17. Dimensionsp. 22
18. Using the STAND-BARp. 23
19. Installing the Wall Mountp. 24

    Kit The wall mount kit (sold separately) allows you to mount the product on the wall. For detailed information on installing the wall mount, see the…

20. Installing the Wall Mount Kitp. 24

    The wall mount kit (sold separately) allows you to mount the product on the wall. For detailed information on installing the wall mount, see the instructions…

21. Wall Mount Kit Specifications (VESA)p. 24

    ― ― Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces other than plaster board, please contact…

22. Remote Control (RS232C)p. 25

    Cable Connection RS232C Cable Interface RS232C (9 pins) Pin TxD (No.2), RxD (No.3), GND (No.5) Bit rate 9600 bps Data bits 8 bit Parity None Stop bit 1 bit…

23. Cable Connectionp. 25

    RS232C Cable Interface RS232C (9 pins) Pin TxD (No.2), RxD (No.3), GND (No.5) Bit rate 9600 bps Data bits 8 bit Parity None Stop bit 1 bit Flow control None…

24. Connectionp. 28
25. Control Codesp. 29

    Viewing control state (Get control command) Header Command ID Data length Checksum 0xAA Command type 0 Controlling (Set control command) Header Command ID Data…

26. Before Connectingp. 38

    Pre-connection Checkpoints ― ― Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices…

27. Pre-connection Checkpointsp. 38

    ― ― Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to…

28. Connecting to a PCp. 38

    Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. • • A PC can be…

29. Connection using an HDMI Cablep. 38
30. Connection using an HDMI-DVI Cablep. 39

    ― ― When you connect a PC to the product using an HDMI-DVI cable, set Edit Name to DVI PC to access video and audio content stored on the PC. HDMI IN…