Kyocera P3055dn (1102T73NL0) user manual

Contents

1. Included Guidesp. 3

   The following guides are supplied with the machine. Refer to them as necessary. Product Library disc Quick Guide Describes the procedures for installation of…

2. Safety Conventions in This Guidep. 4

   The sections of this guide and parts of the machine marked with

3. Symbolsp. 4

   are safety warnings meant to protect the user, other individuals and surrounding objects, and ensure correct and safe usage of the machine. The symbols and…

4. Legal and Safety Informationp. 7

   Notice on Software SOFTWARE USED WITH THIS PRINTER MUST SUPPORT THE PRINTER'S EMULATION MODE. The printer is factoryset to emulate the PCL. Notice The…

5. License Agreementsp. 8

   GPL/LGPL This product contains GPL (http://www.gnu.org/licenses/gpl.html) and/or LGPL (http://www.gnu.org/licenses/lgpl.html) software as part of its firmware.…

6. Energy Saving Control Functionp. 11

   To reduce energy consumption while in a waiting state, the device comes equipped with an energy saving control function for switching to a Sleep Mode where…

7. Wireless Connection (Mexico only)p. 12

   The operation of this equipment is subject to the following two conditions: (1) it is possible that this equipment or device may not cause harmful…

8. Security Precautions when Using Wireless LAN (If equipped)p. 12

   Wireless LAN allows information to be exchanged between wireless access points instead of using a network cable, which offers the advantage that a LAN…

9. Limited Use of This Product (If equipped)p. 13

   Radio waves transmitted from this product may affect medical equipment. When using this product in a medical institution or in the vicinity of medical…

10. Environmentp. 13

    The service environmental conditions are as follows: • Temperature: 50 to 90.5 °F (10 to 32.5 °C) • Humidity: 15 to 80 % However, adverse environmental…

11. Interface connectorsp. 13

    IMPORTANT Be sure to power off the printer before connecting or disconnecting an interface cable. For protection against static electricity discharge to the…

12. Cautions when Handling Consumablesp. 14

    Do not attempt to incinerate parts which contain toner. Dangerous sparks may cause burns. Keep parts which contain toner out of the reach of children. If toner…

13. Other precautionsp. 14

    Return the exhausted toner container and waste toner box to your dealer or service representative. The collected toner container and waste toner box will be…

14. SAFETY OF LASER BEAM (USA)p. 15

    1. Safety of laser beam This machine has been certified by the manufacturer to Class 1 level under the radiation performance standards established by the…

15. Safety Instructions Regarding the Disconnection of Power (USA)p. 16

    Caution: The power plug is the main isolation device! Other switches on the equipment are only functional switches and are not suitable for isolating the…

16. Laser Safety (Europe)p. 17

    Laser radiation could be hazardous to the human body. For this reason, laser radiation emitted inside this machine is hermetically sealed within the protective…

17. About the Operation Guidep. 18

    This Operation Guide has the following chapters: Chapter 1 - Machine Parts This chapter explains the names of parts. Chapter 2 - Preparation before Use This…

18. Conventionsp. 18

    This manual uses the following conventions. Convention Description Example Italic Typeface Used to emphasize a key word, phrase or reference to additional…

19. 1 Machine Partsp. 19
20. 2 Preparation before Usep. 25
21. 3 Printingp. 71
22. 4 Operation Panelp. 81
23. 5 Document Boxp. 237
24. 6 Status Menup. 267
25. 7 Maintenancep. 275
26. 8 Troubleshootingp. 287
27. Appendixp. 315
28. Glossaryp. 345

    Glossary Additional memory An additional memory (optional) is used for increasing the memory capacity of this machine. For DIMM that can be used in this…