Loading manual…
Loading manual…
I Foreword General This Quick Start Guide (hereinafter referred to be "the Manual) introduces the functions and operations of the NVR devices (hereinafter…
III Important Safeguards and Warnings The following description is the correct application method of the Device. Read the Manual carefully before use to…
All the installation and operations here should conform to the local electric safety rules. The Device does not support wall mounting with the front panel…
The following figures are for reference only. The actual product shall govern. Shut off the power before you replace the HDD
For the first time installation, check whether the HDD has been installed or not. It is recommended to use HDD of enterprise level or surveillance level. It is…
For the first time installation, make sure whether the HDD has been installed or not. It is recommended to use HDD of enterprise level or surveillance level.…
Following figures are for reference only. The actual product shall govern. 1U series connection Figure 3-1 Check the icons on the rear panel carefully and…
Slight difference might be found on the interfaces of different models. Following figures are for reference only. The actual product shall govern
Before the boot up, please make sure: The rated input voltage shall match with the device power requirement. Make sure the power wire connection is ready and…
When booting up for the first time, you need to configure the password information for admin (by default). To guarantee device security, keep the login…
Select Main Menu > NETWORK > TCP/IP. The TCP/IP interface is displayed. See Figure 4-4. Click to modify the IP address according to the actual situation (the…
Select Main Menu > CAMERA > Registration. The Registration interface is displayed. See Figure 4-5. You can register remote devices through the following two…
All channels are 24-hour recording continuously by factory default. You can customize the record period and record type. Select Main Menu > STORAGE > SCHEDULE…
Select Main Menu > Playback or right-click on the preview interface and select Search. The record search interface is displayed. See Figure 4-7. You can play…
Click at the top right corner and then select Shutdown.
If it is your first time to log in the Device, you shall initialize the Device first. For detailed information, see User’s Manual. Open the browser and enter…
Scan the QR code with the cell phone to download and install the mobile app. Step 1 You can get the mobile app QR code and device SN QR code through the…
Cybersecurity Recommendations 17 Cybersecurity Recommendations Appendix 1 Cybersecurity is more than just a buzzword: it’s something that pertains to every…