BenQ MH733 (9H.JGT77.13E) user manual

Contents

1. Preparationp. 5

   Preparation Your BenQ projector is equipped with wired and wireless network function. Via a network connection you can project what is shown on your computer…

2. Switching to Advanced Menup. 5

   When you first enter the projector’s OSD menu, you will see the OSD’s Basic Menu. Before you can configure the projector and network settings to use the…

3. Wired connectionsp. 6

   For projecting through a wired network, you need to connect the projector and your device to the same local area network (LAN). Setting up a wired network for…

4. Wireless connectionsp. 8

   If you want to project wirelessly, you must first install the BenQ WDRT8192 USB wireless dongle onto your projector. This USB wireless dongle is not shipped…

5. Projecting via QCast (for PCs)p. 11

   Projecting via QCast (for PCs) QCast is an application that allows you to project your computer’s screen as well as photos and documents saved on your computer…

6. Minimum system requirementsp. 11

   Before installing and running QCast, please make sure your computer meets the requirements listed below. • Computers with Windows Operating System (OS): •…

7. Prerequisitep. 11

   The basic workflow for projecting via QCast: 1. Download QCast from BenQ’s website. 2. Install QCast on your computer. 3. Connect your computer to the…

8. Using QCastp. 14

   Role assignment The first user connected to the projector using QCast is designated as the host. Users that join subsequently are designated as guests. Only…

9. Projecting via QCast (for mobile devices)p. 22

   Projecting via QCast (for mobile devices) QCast is an application that allows you to project your mobile device’s screen as well as photos and documents saved…

10. Minimum system requirementsp. 22

    Before installing and running QCast, please check to make sure your mobile device meets the requirements listed below. • Mobile devices with Android Operating…

11. Prerequisitep. 22

    The basic workflow for projecting via QCast is: 1. Select Network Display in the input source menu. 2. Download and install QCast using the app store of your…

12. Using QCastp. 26
13. Managing the projector using a web browserp. 30

    Managing the projector using a web browser Once the projector is connected to a wired local area network and the projector is on or in standby mode, you can…

14. Supported web browsersp. 30
15. Configuring Standby Settings for the projectorp. 30

    In order to control the projector remotely while the projector is in standby mode, you need to enable the Network Standby Mode and Monitor Out settings for the…

16. Accessing the BenQ Projector Control Systemp. 30

    1. Make sure your computer and the projector are connected to the same local area network. See "Wired connections" on page 6 for details. 2. Launch the web…

17. Accessing the Internet with a wireless connectionp. 40

    Accessing the Internet with a wireless connection When a wireless network is set up for your projector as described in the Wireless connections section…

18. Accessing the Internet via QCastp. 40

    1. Make sure the projector is installed with BenQ WDRT8192 USB wireless dongle and a wireless network is set up for the projector. See "Setting up a wireless…

19. Accessing the Internet via projector OSDp. 40

    1. Press MENU on the projector. 2. Highlight Network and press OK. 3. Highlight Wireless LAN and press OK. 4. Highlight Client and press OK. 5. Highlight…

20. PJLink commandsp. 42

    PJLink commands This projector supports standard protocol PJLink for projector control. Supported commands are as below. The below supported commands may vary…

Other documents for this model

• BenQ MH733 (9H.JGT77.13E) user manual