AG Neovo QF-28 user manual

Contents

1. SAFETY PRECAUTIONSp. 3

   NOTICE: 1. The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the…

2. FOR YOUR SAFETYp. 3

   Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. SAFETY PRECAUTIONS NOTICE: 1. The…

3. SPECIAL NOTES ON LCD MONITORp. 5

   The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES • You may find slightly uneven brightness on the screen depending on…

4. BEFORE YOU OPERATE THE MONITORp. 6

   FEATURES • 71.0cm(28 inches) TFT Color LCD Monitor • Crisp, Clear Display for Windows • Recommended Resolutions: 3840x2160@60Hz • Ergonomic Design • Space…

5. FEATURESp. 6

   71.0cm(28 inches) TFT Color LCD Monitor • Crisp, Clear Display for Windows • Recommended Resolutions: 3840x2160@60Hz • Ergonomic Design • Space Saving, Compact…

6. CHECKING THE CONTENTS OF THE PACKAGEp. 6

   The product package should include the following items: 1. LCD Monitor 2. Owner’s Manual (including CD-ROM & Warranty Card) 3. Power Cord 4. DVI Cable 5. DP…

7. ADJUSTING THE VIEWING ANGLEp. 7

   For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. Hold the stand so that…

8. CONNECTING CABLESp. 8

   SIGNAL CABLE Connecting the Signal Cable: Plug the Signal Cable one end to LCD monitor’s ―DSUB‖ socket, the other end to the computer’s VGA port and tighten…

9. GENERAL INSTRUCTIONSp. 10

   Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the monitor (See Figure 4). By changing these…

10. EXTERNAL CONTROLSp. 10
11. FRONT PANEL CONTROLp. 11

    Auto/ Source / Exit: 1. When OSD menu is in active status, this button will act as EXIT-KEY (EXIT OSD menu). 2. When OSD menu is in off status, press this…

12. HOW TO ADJUST A SETTINGp. 13

    1. Press the MENU-button to activate the OSD window. 2. Press + or - to navigate through the functions. Once the desired function ishighlighted, press the…

13. HOW TO ADJUST PIP/ PBP SETTINGp. 13
14. ADJUSTING THE PICTUREp. 14

    The descriptions for function control. Main Menu Item Main Menu Icon Sub Menu Item Sub Menu Description Luminance Contrast Contrast from Digital-register…

15. PLUG AND PLAYp. 16

    Plug & Play DDC1/2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host…

16. TECHNICAL SUPPORT (FAQ)p. 17

    Problem & Question Possible Solution Power LED is not on. • Check if the Power Switch is in the ON position. • Power Cord should be connected. No Plug & Play •…

17. ERROR MESSAGE & POSSIBLE SOLUTIONp. 18

    CABLE NOT CONNECTED : 1. Check that the signal-cable is properly connected. If the connector is loose, tighten the connector’s screws. 2. Check the signal…

18. APPENDIXp. 19

    SPECIFICATIONS Specifications QF-28 LCD Panel Panel Type LED-backlit TFT LCD Panel Size 28" Pixel Pitch (mm) 0.16 x 0.16 Max. Resolution 3840 x 2160 Display…

19. SPECIFICATIONSp. 19

    QF-28 LCD Panel Panel Type LED-backlit TFT LCD Panel Size 28" Pixel Pitch (mm) 0.16 x 0.16 Max. Resolution 3840 x 2160 Display Colour 1.073B Frequency (H/V) H.…

20. FACTORY PRESET TIMING TABLEp. 21

    Preset Display Modes Standard Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) VGA 640×480 @60Hz 31.469 59.940 640×480 @67Hz 35.000 66.667 640×480…

21. CONNECTOR PIN ASSIGNMENTp. 23

    5 6 10 11 15 Figure 6 15-Pin Color Display Signal Cable Pin No. Description Pin No. Description 1 Red 9 +5V/Sense(+5V) 2 Green 10 Monitor Gnd 3 Blue 11 Logic…

22. PRODUCT DIMENSIONSp. 26

    QF-28 ► Front View ► Side View ► Top View Company Address: 5F-1, No. 3-1, Park Street, Nangang District, Taipei, 11503, Taiwan. 26