Samsung XRN-1610S, 2TB (XRN-1610S-2TB) user manual

Contents

1. Featuresp. 6

   The product records video and audio from network cameras to a hard disk, and enables playback from the hard disk. It also provides remote monitoring…

2. Part Names and Functions (Front)p. 7

   xrn-1610S, xrn-1610 Part Names Functions a LED Indicator REC : Lights on when recording is in progress. HDD : Displays the normal access to HDD. LED turns on…

3. Part Names and Functions (Rear)p. 7
4. Remote Controlp. 8

   POWER Displays the Exit pop up screen. REC Starts or ends the live recording. ID Sets the ID of the system. Select 2 digits from 0 ~ 9 while pressing the ID…

5. Checking the installation environmentp. 9

   This product is a top-notch security device that is equipped with a high-capacity HDD and other key circuit boards. Note that an excessive internal temperature…

6. HDD Additionp. 10

   Make sure to unplug the power cord from the wall outlet to prevent possible electric shock, injury or product damage. Please consult your provider for further…

7. Connecting the Alarm Input/Outputp. 12

   The Alarm In/Out port at the back is composed of the following. • ALARM IN 1 ~ 8 : Alarm Input Port • ALARM RESET : On receiving an Alarm Reset signal, the…

8. Connecting the Networkp. 13

   M ` For more information about network connection, refer to "Network Configuration". (Page 45) network connection via ethernet (10/100/1000Baset) network…

9. Getting Startedp. 15

   Starting the system 1. Connect the power cable of the NVR to the wall outlet. 2. You will see the initialization screen. The initialization process will last…

10. Layoutp. 22

    In the live screen, you can set the layout for each channel. Setting up the Live Layout This section outlines how to select a series of channels based on their…

11. Audio ON/OFFp. 23

    You can turn the sound on/off corresponding to the channel in Live mode. audIo on/off in Single mode Click on the audio icon ( ) on the screen to turn it…

12. Freezep. 23

    This is available only in Live mode, this pauses playing the Live image temporarily. 1. Click < > of the launcher mode. Video playing is paused. 2. Click on <…

13. Event Monitoringp. 23

    This will display the channel in sync with a specific event (Sensor/Motion/Video Loss) if it occurs. In "monitor > event display", set the event monitoring to…

14. Maintain the Screen Ratiop. 24

    The screen ratio for a live video can be changed. maintain a screen ratio for all channels Video screen ratio for all channels can be changed in live split…

15. PTZ controlp. 24

    ZOOM Audio ► Freeze Stop Alarm Capture Record Keep ch. scr ratio Play Search Backup Menu Quick Setup ► Shutdown Hide Launcher Logout ; Scene Mode ► CH Info…

16. Backupp. 26

    You can check the backup device and set the backup schedule by channel or by time. 1. Select <Backup> from the live screen menu. You can click on < > in the…

17. System Setupp. 27

    You can setup Date/Time/Language, User, System Properties and Log. Date/Time/Language Setting the Date/Time/Language You can check and setup the current…

18. Setting the Devicep. 32

    You can configure settings related to camera, storage media, monitor and text. Camera To register a camera You can register a network camera for each channel…

19. Setting the Recordingp. 41

    You can setup scheduled recording, event recording and other recording related settings. Recording Schedule Make your reservation on a date and time to…

20. Setting the Eventp. 43

    You can make the setup for record in case of sensor detection, camera event or video loss detection. Sensor Detection You can set the sensor's operating…

21. Network Configurationp. 45

    It provides networked monitoring of Live screen from a remote place, and supports mail forwarding function with events. You can configure the network…

22. Playbackp. 52

    Play You can play data stored in the HDD and backup a desired portion of the data. 1. In the live screen menu, select the <Play> menu or click on < > in the…

23. What is Web Viewer?p. 53

    WebViewer is a software program with which the operator can access a remote NVR (Network Video Recorder) for real-time monitoring, PTZ control (if configured)…

24. Live Screen Configurationp. 56

    System Status You can check the status or operation of the NVR with the icons on the live screen. ` On a plug-in free web viewer, the status information icon…

25. Controlling a Connected Network Camerap. 59

    Controlling PTZ If PTZ camera is connected, the < > icon appears on screen. When selecting corresponding camera channel, the PTZ tab is provided to allow you…

26. Search Viewerp. 61

    You can search and play the video record saved in NVR by accessing NVR remotely. Search Viewer Screen Item Description a Menu Selection Switches to the…

27. Setup Viewerp. 64

    You can configure the NVR settings remotely on the network. To configure the NVR settings, click <Setup>. Settings Screen Item Description a Menu Selection…

28. SEC Backup Viewerp. 73

    You can play a file that is backed up in the format of SEC. Backup in SEC format produces backup data file, library file and self-executable viewer file. If…

29. Product Specificationp. 74

    Item Details XRN-1610 XRN-1610S Display Network Camera Inputs Max. 16CH Resolution CIF ~ 12MP Protocols Samsung, ONVIF Live Local Display 1x HDMI / 1x VGA…

30. Product Overviewp. 76

    XRN-1610 unit : mm (inches) • XRN-1610S unit : mm (inches) 76_ appendix appendix