Zebra XSLATE L10 (RTL10C0-0A11X1X-01) quick start guide

Contents

1. Configurationsp. 3

   L10ax used in this guide refers to all configurations, except where noted. There are two form factors in the L10ax platform. Each is different from the other.…

2. XSLATE L10ax Featuresp. 3

   The XSLATE L10ax tablet has two microphones, the ambient light sensor (ALS), a 2-megapixel front camera and a 13-megapixel rear camera, and other features.…

3. XPAD L10ax Featuresp. 6

   The XPAD L10ax tablet has two microphones, the ambient light sensor (ALS), a 2-megapixel front camera and a 13-megapixel rear camera, and other features. Most…

4. Preparing the Tablet for First Usep. 9

   To start using the tablet for the first time, insert the battery and charge the tablet. If your tablet is enabled with Wireless Wide Area Networking (WWAN)…

5. Inserting a SIM Cardp. 9

   A WWAN-enabled L10ax tablet supports a SIM card and an eSIM. Switching between SIMs is done within Windows. Most people need only one SIM. Before you can…

6. Powering On the Tabletp. 10

   After installing the battery, connect the tablet to external power and power up the tablet. If you have not yet inserted the battery, remove it from the…

7. Optional Setup Tasksp. 12

   This section explains how to attach the pen tether and how to connect the tablet to an external monitor

8. Attaching the Pen Tetherp. 12

   The pen comes with a tether so that you can attach it to your tablet to avoid misplacing it. 1. Slip one end of the tether through the hole at the end of the…

9. Connecting the Tablet to an External Monitorp. 12

   There is no dedicated port for an external monitor on the tablet. The tablet has a USB Type-C connector which includes a Display Port output capability. You…

10. Back of Battery Charge Indicatorsp. 12

    You can check the charge of a battery when it is out of the tablet by pressing the battery check button on the rear. IMPORTANT: If you remove the battery while…

11. Scanning with the Integrated Barcode Scanner (XPAD Only)p. 13

    Use the Barcode Scanner to capture barcode data. The optional XPAD L10ax scanner is a factory-installed device consisting of a barcode optical image reader and…