APC Uninterruptible Power Supply (SRTL3KRM1UC) user manual

Contents

1. General Informationp. 3

   Important Safety Instructions SAVE THESE INSTRUCTIONS - This manual contains important instructions that should be followed during installation and maintenance…

2. Important Safety Instructionsp. 3

   SAVE THESE INSTRUCTIONS - This manual contains important instructions that should be followed during installation and maintenance of the APC™ Smart-UPS™ Ultra…

3. Product Handling Guidelinesp. 3

   Safety and General Information • Adhere to all national and local electrical codes. • All wiring must be performed by a qualified electrician. • Connect only…

4. Product Descriptionp. 6

   The APC Smart-UPS Ultra SRTL is a high power density and high performance uninterruptible power supply (UPS). The UPS helps to provide protection for…

5. Product Overviewp. 7

   Specifications For additional specifications visit our web site, www.apc.com. Environmental Physical The products are heavy. Follow all lifting guidelines.…

6. Specificationsp. 7

   For additional specifications visit our web site, www.apc.com. Environmental Physical The products are heavy. Follow all lifting guidelines. Electrical…

7. Location of QR Codes for Product information and Registrationp. 9

   Rear Panel Features Note: Refer to the table “Key to identify rear panel features” on page 8, that provides a key to the callout numbers for the rear panel…

8. Rear Panel Featuresp. 9

   Note: Refer to the table “Key to identify rear panel features” on page 8, that provides a key to the callout numbers for the rear panel graphics depicted in…

9. Installationp. 11

   Rack Installation 4 post rack mounting Refer to the Rail Kit Installation Guide for instructions on rail installation. CAUTION RISK OF FALLING EQUIPMENT • The…

10. Rack Installationp. 11

    post rack mounting Refer to the Rail Kit Installation Guide for instructions on rail installation. CAUTION RISK OF FALLING EQUIPMENT • The equipment is heavy.…

11. Tower Installationp. 13

     Install the rack-mount brackets to the UPS.  Install the UPS to the 2 post rack.  Install the RBM as per steps  and  in “4 post rack mounting” on page 9.…

12. Wall Installationp. 14

    CAUTION RISK OF FALLING EQUIPMENT • The equipment is heavy. • Always practice safe lifting techniques adequate for the weight of the equipment. Failure to…

13. Operationp. 15

    Connect Equipment and Input Power Note: The UPS RBM will charge to 90% capacity in the first 1.5 hours of normal operation. Do not expect full battery runtime…

14. Connect Equipment and Input Powerp. 15

    Note: The UPS RBM will charge to 90% capacity in the first 1.5 hours of normal operation. Do not expect full battery runtime capability during this initial…

15. Turn the UPS On/Offp. 15

    The first time the UPS is turned on the Setup Wizard screen will run. Follow the prompts to configure UPS settings. Refer to “Configuration” on page 17. To…

16. UPS Display Interfacep. 16

    operation The UPS display interface is a touchscreen interface. Touch on the icon to activate the key function. Use the UP/DOWN buttons to scroll through the…

17. Configurationp. 20

    UPS Settings There are three ways to select UPS configuration options. 1. The first time the UPS is turned on the Setup Wizard screen will open. On each menu…

18. UPS Settingsp. 20

    There are three ways to select UPS configuration options. 1. The first time the UPS is turned on the Setup Wizard screen will open. On each menu screen select…

19. Controllable Outlet Groupsp. 27

    provide battery backup power to connected equipment. Overview The controllable outlet groups can be configured using the Advanced menu options. Refer to…

20. Emergency Power Offp. 28

    Overview The Emergency Power Off (EPO) option is a feature that will immediately disconnect all connected equipment from mains power. The UPS will immediately…

21. Network Management Interfacep. 29

    NOTE: This feature is available only in SRT3KRM1UNC and SRT2K2RM1UNC models

22. Introductionp. 29

    The UPS has a network port and console port that can be used to access the Network Management Interface. The Network Management Interface have the same…

23. Featuresp. 29

    The Network Management Interface allows the UPS to function as a Web based, IPv6 ready product. The Network Management Interface can manage the UPS using…

24. Related Documentsp. 29

    For related documents refer our web site, www.apc.com

25. IP Address Configurationp. 29

    The default TCP/IP configuration setting DHCP, assumes that a properly configured DHCP server is available to provide TCP/IP settings to the Network Management…

26. Upgrade Firmwarep. 30

    The firmware of the UPS, Battery Module and XLBPs can be updated using web-interface, which is built into the UPS network management card. The encrypted image…

27. APC SmartConnectp. 30

    NOTE: This feature is available only in SRTL3KRM1UC/SRTL2K2RM1UC. APC SmartConnect allows you to monitor the health and status of your UPS from any device…

28. Physical Securityp. 30

    Deploy the UPS in a secure location • Custodians should secure the UPS from unauthorized physical access. • Access should be restricted to only those who are…

29. Smart Battery Managementp. 31

    Definitions • Replaceable Battery Module (RBM): A string of battery cells arranged to produce a battery assembly with a connector. RBMs can be ordered from our…

30. Troubleshootingp. 33

    Use the table below to solve minor installation and operation problems. Refer to our web site, www.apc.com for assistance with complex UPS problems. The UPS…