Emerson IS-WEBRT3N user manual

Contents

1. 1 Introductionp. 5

   1.1 Features The Liebert IS-WEBRT3N card is a new generation SNMP (Simple Network Management Protocol) UPS monitoring product. The card permits remote control…

2. 1.1 Featuresp. 5

   The Liebert IS-WEBRT3N card is a new generation SNMP (Simple Network Management Protocol) UPS monitoring product. The card permits remote control of the UPS…

3. 1.2 Applicationsp. 5

   1.2.1 IS-WEBRT3N Card Web Interface The system administrator can use a Web browser to check the status of all UPSs where a IS-WEBRT3N has been installed. The…

4. 2 What’s Includedp. 7

   Liebert IS-WEBRT3N card • Liebert Web Card CD, including: • DeskPro-Net Utility: Configure Liebert Web Card UPS IP address, update firmware • Liebert…

5. 3 Installationp. 9

   Before using the Liebert Web Card, the hardware and software configuration is necessary. 1. Install the IS-WEBRT3N card in the Liebert IntelliSlot® bay on the…

6. 4 UPS Web management by IS-WEBRT3N Cardp. 11

   4.1 Introduction After installing the Liebert IS-WEBRT3N card, including hardware installation and setting its IP address, users can access the card’s Web…

7. 4.1 Introductionp. 11

   After installing the Liebert IS-WEBRT3N card, including hardware installation and setting its IP address, users can access the card’s Web interface to monitor…

8. 4.2 IS-WEBRT3N Card UPS Web Interfacep. 11

   Enter the IS-WEBRT3N card’s Web interface. There are four main function items in the first Web page: • Information • Configuration • Log Information • Help…

9. 4.3 Configurationp. 13

   Sub-Menu • UPS Configuration • UPS On/Off Schedule • Network • SNMP • SMS • Email • WEB/Telnet • System Time • Language NOTE: This page’s selection will differ…

10. 4.4 Log Informationp. 21

    Sub-Menu • Event Log • Data Log • Battery Test Log • Help NOTE: This page’s selection differs according to the model of the UPS. 4.4.1 Event Log This page…

11. 4.5 Helpp. 22

    From this page, you can view help for each feature or option NetAgent offers. Search NetAgent Displays all the NetAgent cards within the network and their…

12. 5 Telnet—Remote Monitoringp. 23

    5.1 Introduction The IS-WEBRT3N card supports multiple Network Management Systems and LAN protocols. After installing and configuring the card, you have the…

13. 5.1 Introductionp. 23

    The IS-WEBRT3N card supports multiple Network Management Systems and LAN protocols. After installing and configuring the card, you have the same configuration…

14. 5.2 Telnet Configurationp. 23

    1. Click Start>Run and enter telnet and the IS-WEBRT3N cards IP address. If the connection is successful, the Telnet window opens. 2. Press the Enter key. If…

15. 6 Shut-down Utilityp. 25

    Vertiv™offers a shut-down utility, Power Insight, available from your local Vertiv™representative and at www.VertivCo.com. Power Insight automated shut-down…