Loading manual…
Loading manual…
The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Prior to…
CPU Intel® Xeon® Processor E-2100/ E-2200 series 8th Gen. Intel Core™ i3/ Pentium®/ Celeron® Processors Chipset Intel® C242 Express Chipset Memory 4 x…
1-3-1 Installing the CPU A. Locate the alignment keys on the motherboard CPU socket and the notches on the CPU. Read the following guidelines before you begin…
Read the following guidelines before you begin to install the memory: • Make sure that the motherboard supports the memory. It is recommended to use memory of…
Follow the steps below to install a M.2 SSD module on your motherboard. Step1. Insert the M.2 SSD module into the slot. Step2. Secure it with the screw…
u Serial Port Connects to serial-based mouse or data processing devices. v RJ-45 LAN Port #2 The Gigabit Ethernet LAN port provides Internet connection at up…
Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. •…
Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use arrow keys to move among the items and press <Enter> to accept…
The Advanced Menu displays submenu options for configuring the function of various hardware components. Select a submenu item, then press <Enter> to access the…
Parameter Description CPU Configuration Type / ID / Speed / L1 Data Cache / L1 Instruction Cache / L2 Cache/ L3 Cache Displays the technical specifications for…
Parameter Description Server ME Configuration ME Firmware Status #1/#2 Displays ME Firmware status information. Current State (for ME Firmware) Displays ME…
Parameter Description AST2500 Super IO Configuration Super IO Chip Displays the Super IO Chip information. Serial Port 1/2 Configuration Press [Enter] to…
(Note) This item is present only if you attach USB devices. Parameter Description USB Configuration USB Devices: Displays the USB devices connected to the…
displays submenu options for configuring the function of Platform Controller Hub(PCH). Select a submenu item, then press <Enter> to access the related submenu…
Parameter Description PCH-IO Configuration SATA Configuration Press [Enter] to configure advanced items. SATA Controller – Enable/Disable SATA controller. –…
Parameter Description FRB-2 Timer Enable/Disable FRB-2 timer (POST timer). Options available: Enabled/Disabled. Default setting is Disabled. FRB-2 Timer…
Parameter Description BMC network configuration Lan Channel 1 Configuration Address source Select to configure LAN channel parameters statically or dynamically…
The Security menu allows you to safeguard and protect the system from unauthorized use by setting up access passwords. There are two types of passwords that…
The Secure Boot submenu is applicable when your device is installed the Windows® 8 (or above) operating system. (Note) Advanced items prompt when this item is…
The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error message if the legacy drive(s) specified is not…
The Save & Exit menu displays the various options to quit from the BIOS setup. Highlight any of the exit options then press <Enter>. Parameter Description Save…
2-9-1 PEI Beep Codes 2-9-2 DXE Beep Codes # of Beeps Description 1 Memory not Installed. 1 Memory was installed twice (InstallPeiMemory routine in PEI Core…