Loading manual…
ATEN KE9950R user manual
Open PDFOpens the file on objects.icecat.biz.
Contents
- Compliance Statementsp. 2
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device…
- User Informationp. 3
Online Registration Be sure to register your product at our online support center: Telephone Support For telephone support, call this number: International…
- Product Informationp. 4
For information about all ATEN products and how they can help you connect without limits, visit ATEN on the Web or contact an ATEN Authorized Reseller. Visit…
- About This Manualp. 19
This manual is provided to help you get the most out of your KVM over IP Matrix System. It covers all aspects of the device and system, including installation…
- Introductionp. 22
Overview The KVM over IP Matrix System is a solution that combines KE Series KVM over IP Extenders (KE6900, KE6900A, KE6900AiT, KE6940, KE6940A, KE6940AiT…
- Hardware Setupp. 96
Mounting For convenience and flexibility, the transmitters can be mounted onto a system racks or wall. Note: Optional mounting options are available, refer to…
- OSD Operationp. 158
Overview This chapter provides instructions to configure and operate KE Series devices using the local On Screen Display (OSD). To configure the network…
- Software Installationp. 190
Overview The CCKM KE Matrix Manager Software is a browser based GUI that provides management of KE Series devices over a network. You can download the KE…
- Browser / Telnet Operationp. 200
Overview The CCKM KE Matrix Manager software can be accessed through most standard web browsers and via Telnet. Once users log in and are authenticated, the…
- System Statusp. 218
Chapter 6 System Status Overview The System Status panel is found at the top of the KE Matrix Manager main page. This section provides status information about…
- System Settingsp. 270
Overview The System Settings are accessed by clicking from the System Status page (see System Status, page 197). There are 7 tabs to configure the KE Manager…
- Connectionsp. 294
Overview The Connections panel is found on the KE Matrix Manager main page, just below System Status. Connections provides a diagram of current Transmitter to…
- Scheduled Profilep. 298
Overview The Scheduled Profile panel is found on the KE Matrix Manager main page, just below Connections. Scheduled Profiles displays connection profiles that…
- Sessionsp. 300
Overview The Sessions panel is found at the bottom of the KE Matrix Manager main page, just below Scheduled Profile. Sessions displays information about users…
- Remote Viewer (AiT Models only)p. 302
Introduction If the video source(s) of your AiT model is connected, the remote viewer can be used to access these video source(s) as if it were your local…
- Firmware Upgrade Utilityp. 326
The Windows-based Firmware Upgrade Utility (FWUpgrade.exe) provides a smooth, automated process for upgrading the firmware. The Utility comes as part of a…
- CLI Commandsp. 332
Serial Control Protocol Commands The KE Series’s built-in bi-directional RS-232 serial interface and LAN port connection allows system control via Receivers…
- Appendixp. 364
Safety Instructions General This product is for indoor use only. Read all of these instructions. Save them for future reference. Follow all warnings and…