Zebra ET85 (ET85B-3P5A1-000) user manual

Contents

1. About This Documentp. 7

   Introduction This guide provides information about using the device and accessories. NOTE: Screens and windows pictured in this guide are samples and can…

2. Getting Startedp. 12

   This section explains how to set up the device for the first time. Unpacking 1. Carefully remove all protective material from the device and save the shipping…

3. Using the Tabletp. 19

   This chapter provides instructions on how to use some basic applications and key features. Start Screen By default, the Start screen displays in Desktop mode.…

4. Softwarep. 31

   This chapter provides instructions on initial setup, how to reset the tablet, and how to reinstall Windows. Initial Windows Setup After performing a factory…

5. Data Capturep. 36

   The device supports data capture using an integrated scanner and Windows compatible Zebra Bluetooth and USB scanners. For information on pairing and scanning…

6. Wirelessp. 39

   This section provides information on the wireless features: • Wireless Local Area Network (WLAN) • Wireless Wide Area Network (WWAN) • Bluetooth • Near Field…

7. Accessoriesp. 49

   This section provides information for using the accessories for the device. This following table lists the accessories available for the device. Table 2…

8. Maintenance and Troubleshootingp. 69

   This chapter includes instructions on cleaning and storing the tablet, battery maintenance and provides troubleshooting solutions for potential problems during…

9. Specificationsp. 76

   For device technical specifications, go to zebra.com/support. Data Capture Supported Symbologies Decode Distances The table below lists the typical distances…