TP-Link JetStream 8-Port Gigabit L2 Managed Network Switch (TL-SG3210 V1) user manual

Contents

1. Chapter 1 About This Guidep. 12

   This User Guide contains information for setup and management of TL-SG3210/TL-SG3216/ TL-SG3424/TL-SG3424P JetStream L2 Managed Switch. Please read this guide…

2. Chapter 2 Introductionp. 16

   Thanks for choosing the TL-SG3210/TL-SG3216/TL-SG3424/TL-SG3424P JetStream L2 Managed Switch! 2.1 Overview of the Switch Designed for workgroups and…

3. Chapter 3 Login to the Switchp. 20

   3.1 Login 1) To access the configuration utility, open a web-browser and type in the default address http://192.168.0.1 in the address field of the browser…

4. Chapter 4 Systemp. 22

   The System module is mainly for system configuration of the switch, including four submenus: System Info, User Management, System Tools and Access Security.…

5. Chapter 5 Switchingp. 53

   Switching module is used to configure the basic functions of the switch, including four submenus: Port, LAG, Traffic Monitor and MAC Address. 5.1 Port The Port…

6. Chapter 6 VLANp. 76

   The traditional Ethernet is a data network communication technology based on CSMA/CD (Carrier Sense Multiple Access/Collision Detect) via shared communication…

7. Chapter 7 Spanning Treep. 98

   STP (Spanning Tree Protocol), subject to IEEE 802.1D standard, is to disbranch a ring network in the Data Link layer in a local network. Devices running STP…

8. Chapter 8 Multicastp. 120

    Multicast Overview In the network, packets are sent in three modes: unicast, broadcast and multicast. In unicast, the source server sends separate copy…

9. Chapter 9 QoSp. 148

   QoS (Quality of Service) functions to provide different quality of service for various network applications and requirements and optimize the bandwidth…

10. Chapter 10 PoEp. 164

    Note: Only TL-SG3424P supports PoE function. PoE (Power over Ethernet) technology describes a system to transmit electrical power along with data to remote…

11. Chapter 11 ACLp. 171

    ACL (Access Control List) is used to filter packets by configuring match rules and process policies of packets in order to control the access of the illegal…

12. Chapter 12 Network Securityp. 185

    Network Security module is to provide the multiple protection measures for the network security, including four submenus: IP-MAC Binding, ARP Inspection, DoS…

13. Chapter 13 SNMPp. 214

     SNMP Overview SNMP (Simple Network Management Protocol) has gained the most extensive application on the UDP/IP networks. SNMP provides a management frame to…

14. Chapter 14 Clusterp. 230

    With the development of network technology, the network scale is getting larger and more network devices are required, which may result in a more complicated…

15. Chapter 15 LLDPp. 245

    Note: Only TL-SG3424P supports LLDP function. LLDP (Link Layer Discovery Protocol) is a Layer 2 protocol that is used for network devices to advertise their…

16. Chapter 16 Maintenancep. 260

    Maintenance module, assembling the commonly used system tools to manage the switch, provides the convenient method to locate and solve the network problem. （1）…

17. Appendix A: Specificationsp. 268

    Standards IEEE802.3 10Base-T Ethernet IEEE802.3u 100Base-TX/100Base-FX Fast Ethernet IEEE802.3ab 1000Base-T Gigabit Ethernet IEEE802.3z 1000Base-X Gigabit…

18. Appendix B: Load Software Using FTPp. 270

    If there is something wrong with the firmware of the switch and the switch cannot be launched, you can load firmware to the switch via FTP function. FTP (File…

19. Appendix C: Glossaryp. 273

    Access Control List (ACL) ACLs can limit network traffic and restrict access to certain users or devices by checking each packet for certain IP or MAC (i.e.…

Other documents for this model

• TP-Link JetStream 16-Port 10GE SFP+ L2+ Managed Switch (TL-SX3016F) installation instructions
• TP-Link T2600G-28SQ user manual