ATEN 1U 10A 8 Outlet Switched Bank Metered PDU + Free Eco PDU Manager Software (PE6108G-ATA-G) user manual

Open PDFOpens the file on objects.icecat.biz.

Configuring SNMPp. 4
Introduction This guide helps you to set up your PE series eco PDU and NRGence eco Sensors software for use with an SNMP manager.With support for SNMP V1, V2C…
Introductionp. 4
This guide helps you to set up your PE series eco PDU and NRGence eco Sensors software for use with an SNMP manager.With support for SNMP V1, V2C and V3, your…
eco PDUp. 5
Graphical User Interface (GUI) To configure the SNMP settings on an individual eco PDU via its graphical user interface (GUI), access the unit’s Device…
Graphical User Interface (GUI)p. 5
To configure the SNMP settings on an individual eco PDU via its graphical user interface (GUI), access the unit’s Device Management page, shown below: Note…
eco Sensorsp. 7
Power Management Software The eco Sensors software uses the SNMP protocol to connect to the eco PDU units in your installation. Note: For full details about…
Power Management Softwarep. 7
The eco Sensors software uses the SNMP protocol to connect to the eco PDU units in your installation. Note: For full details about eco Sensors software and how…
MIB Browserp. 10
Management Information Basep. 10
You can also use a MIB browser to configure the SNMP settings for your PE installation. First, ensure that a suitable MIB browser is installed on your system.…

Contents