Vertiv Geist GU30010L user manual

Contents

1. 1 Overviewp. 5

   The Upgradeable second generation (GU2) product is a high tier rack level power distribution unit (rPDU) with input and output monitoring, outlet level…

2. 1.1 Environmentalp. 5

   The operational environmental limits pertaining to temperature, humidity and elevation are as defined in the following tables. DESCRIPTION MINIMUM MAXIMUM…

3. 1.2 Electricalp. 6

   Electrical product characteristics and performance are defined in the following table. Also, please see the product nameplate for additional rating limits.…

4. 1.3 Networkingp. 6

   The product communications requirements are defined in the next sections. 1.3.1 Ethernet The Ethernet link speed for this product is: 10/100 Mb; full duplex.…

5. 2 Installationp. 9
6. 2.1 Mountingp. 9

   Optional brackets are sold separately. Figure 2.1 Full-length brackets 5

7. 3 Setupp. 21

   3.1 Interchangeable Monitoring Device (IMD-3E) The Interchangeable Monitoring Device (IMD) is the controller for the GU2 line of power products. The IMD can be…

8. 3.1 Interchangeable Monitoring Device (IMD-3E)p. 21

   The Interchangeable Monitoring Device (IMD) is the controller for the GU2 line of power products. The IMD can be replaced and upgraded to allow datacenters to…

9. 3.2 Network Setupp. 25

   The Upgradeable IMD has a default IP address for initial setup and access. Once you have assigned an IP address, the default IP address is no longer active. To…

10. 3.3 Web Interfacep. 29

    The unit is accessible via a standard, unencrypted HTTP connection as well as an encrypted HTTPS (TLS) connection. NOTE: An administrator account (username and…

11. 4 Vertiv Intelligence Directorp. 53

    Vertiv Intelligence Director brings a single unified viewing layer for small deployments of Vertiv Geist rPDUs, Vertiv UPSs, and environmental sensors. When…

12. 4.1 Aggregationp. 53

    The initial element of Veritiv Intelligence Director, available with Vertiv Geist rPDUs running firmware 5.3.0 or later, is called Aggregation. This single…

13. 4.2 Master rPDUp. 53

    Aggregation requires the designation of a Master rPDU, deployed with IMD model IMD-3E. The IMD of the master device facilitates and configures the device…

14. 4.3 Network Configurationp. 54

    Aggregation is enabled on the master rPDUs only. As each master can support up to 49 downstream devices, the number of masters depends on the overall size of…

15. 4.4 Viewsp. 56

    When communication is established between the master and downstream devices, several views are automatically populated within the user interface. The new views…

16. 4.5 Interfacesp. 61

    Downstream devices are combined to form groups, each device retains its own standalone user interface and SNMP data. To access the downstream device user…

17. 5 Appendicesp. 63

    Appendix A: Technical Support A.1 Resetting rPDU If the rPDU loses communication, the processor may be manually rebooted without affecting power to the…

18. Appendix A: Technical Supportp. 63

    A.1 Resetting rPDU If the rPDU loses communication, the processor may be manually rebooted without affecting power to the outlets. Pressing the reboot button…

19. Appendix B: Visible Light Communication (VLC)p. 67

    The VLC feature on Upgradeable PDUs allows the user to unobtrusively upload product information into a database management system via the embedded LED display.…

20. Appendix C: Vertiv Mobile Appp. 69

    The Home screen allows the user to initiate a device scan or export data via .csv file. • Scan: Turns on scan mode to allow the app to capture VLC data from…

21. Appendix D: Available Sensorsp. 76

    D.1 Remote sensors • SRT: Stainless Remote Temperature • GTHD: Temperature/Humidity/Dew Point • GT3HD: Temperature/Humidity/Dew Point with two SRT sensors •…

22. Appendix E: Outlet LEDsp. 77

    Outlet LEDs provide a visual indication of outlet power status (On, Off or Error). The LEDs are sequentially numbered with easy-to-read white numbers on black…

23. Appendix F: IMD Display Codesp. 78

    DISPLAY IMD TYPE EXPLANATION “Err1” IMD-01 (Metered only) The IMD discovered either 0 or more than 1 input boards. This maybe caused byinternalcabling issues…