Netgear GS308EP (GS308EP-100PES) user manual

Contents

1. 1. Hardwarep. 6

   Hardware This user manual is for the NETGEAR Gigabit Ethernet Plus Switches. For a list of switch models that are supported by this manual, see Supported…

2. 2. Install and Access the Switch in Your Networkp. 12

   Install and Access the Switch in Your Network This chapter describes how you can install and access the switch in your network. The chapter contains the…

3. 3. Optimize the Switch Performancep. 21

   Optimize the Switch Performance This chapter describes how you can optimize the performance of the switch. The chapter contains the following sections: • Set…

4. 4. Use VLANS for Traffic Segmentationp. 32

   Use VLANS for Traffic Segmentation This chapter describes how you can use VLANs to segment traffic on the switch. The chapter contains the following sections…

5. 5. Manage the Switch in Your Networkp. 57

   Manage the Switch in Your Network This chapter describes how you can manage the switch in your network. The chapter contains the following sections: • Manage…

6. 6. Maintain and Monitor the Switchp. 68

   Maintain and Monitor the Switch This chapter describes how you can maintain and monitor the switch. The chapter contains the following sections: • Manually…

7. 7. Diagnostics and Troubleshootingp. 86

   Diagnostics and Troubleshooting This chapter covers the following topics: • Test cable connections • Resolve a subnet conflict to access the switch • PoE…

8. A. Factory Default Settings and Technical Specificationsp. 89

   A Factory Default Settings and Technical Specifications This appendix contains the following sections: • Factory default settings • Technical specifications 89

9. B. Additional Switch Discovery and Access Informationp. 93

   B Additional Switch Discovery and Access Information This appendix provides additional information about how you can discover and access the switch in your…

Other documents for this model

• Netgear GS308EPP (GS308EPP-100PES) installation instructions