Peerless-AV Position (LCC18) user manual

Contents

1. Installation to Concrete Ceilingsp. 5

   Drill two 5/16" (8 mm) dia. holes to a minimum depth of 2.5" (64 mm). Attach ceiling plate (B) using two concrete anchors (H) and #14 x 2.5" wood screws (E) as…

2. Installing Reducerp. 6
3. Flush Mount Installationp. 7

   B D Screw reducer (D) into ceiling plate (B) until notch in reducer is aligned with one of the four holes in ceiling plate and set screw (I) is at least…

4. Installation to Extension Columnp. 8

   Screw extension column (EXT or ADJ Series) to ceiling plate (B). Align the notch with one of the four holes in the ceiling plate and secure extension column…

5. Installation to Lightweight Suspended Ceiling Platep. 9

   D EXTENSION COLUMN SLOT SLOT EXTENSION COLUMN SLOT D Refer to instruction sheet for lightweight suspended ceiling plate (CMJ 455) for attachment of ceiling…

6. Attaching Tilt Bracket to LCD Screenp. 10

   BOTTOM OF SCREEN BOTTOM OF SCREEN For screens with a hole pattern in a pocket, spacers (O) go between tilting bracket (C) and screen. C K C K

7. Installation of Vertical Coversp. 13
8. Installation of Top Coversp. 13

   Installation of Vertical Covers R Q T fi g. 8-1

9. Installation of Tilt Covers in the Vertical Positionp. 14

   Installation of Tilt Covers in the Horizontal Position Using a carpenter's knife, cut out any sections of tilt covers (S) necessary to allow them to snap…

10. Installation of Tilt Covers in the Horizontal Positionp. 14

    Using a carpenter's knife, cut out any sections of tilt covers (S) necessary to allow them to snap together over vertical covers (Q) as shown in fi gure 9-1.…