Dell UP3017 user manual

Contents

1. About Your Monitorp. 5

   | 5 About Your Monitor Package Contents Your monitor ships with the components shown below. Make sure that you have received all the components and contact…

2. Product Featuresp. 6

   The Dell UltraSharp UP3017 monitor has an active matrix, thinfilm transistor (TFT), liquid crystal display (LCD), and LED backlight. The monitor features…

3. Identifying Parts and Controlsp. 7

   Front view 1 2 Label Description 1 Function buttons (For more information, see Operating the Monitor) 2 Power on/off button (with LED indicator)

4. Monitor Specificationsp. 10

   Screen type Active matrix - TFT LCD Panel type In-plane switching Technology Aspect ratio 16:10 Viewable image dimensions Diagonal 75.62 cm (30 inches) Active…

5. Plug-and-Playp. 21

   You can install the monitor in any Plug-and-Play-compatible system. The monitor automatically provides the computer system with its extended display…

6. LCD Monitor Quality and Pixel Policyp. 21

   During the LCD monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state which are hard to see and do not…

7. Setting Up the Monitorp. 22

   Attaching the Stand NOTE: The stand riser and stand base are detached when the monitor is shipped from the factory. NOTE: The procedure below is applicable for…

8. Attaching the Standp. 22

   NOTE: The stand riser and stand base are detached when the monitor is shipped from the factory. NOTE: The procedure below is applicable for the default stand.…

9. Using the Tilt, Swivel, and Vertical Extensionp. 25

   NOTE: This is applicable for a monitor with a stand. If you purchased any other stand, refer to the respective stand setup guide for set up instructions. Tilt…

10. Adjusting the Rotation Display Settings of Your Systemp. 26

    After you have rotated your monitor, you need to complete the procedure below to adjust the Rotation Display Settings of your System. NOTE: If you are using…

11. Connecting Your Monitorp. 26

    WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. To connect your monitor to the computer: 1 Turn off your…

12. Organizing Your Cablesp. 29

    After attaching all necessary cables to your monitor and computer, (see Connecting Your Monitor for cable attachment) organize all cables as shown above

13. Removing the Monitor Standp. 29

    CAUTION: To prevent scratches on the LCD screen while removing the stand, make sure that the monitor is placed on a soft, clean surface. NOTE: The procedure…

14. Wall Mounting (Optional)p. 30

    ᒦ ਪஂ ถཱྀ ᑺ E n e r g y C o n s e r v a t i o n C e rt i fi c a ti o n NOTE: Use M4 x 10 mm screws to connect the monitor to the wall-mounting kit. Refer to the…

15. Operating the Monitorp. 31

    | 31 Operating the Monitor

16. Turning on the Monitorp. 31

    Press the button to turn on the monitor

17. Using the Front Panel Controlsp. 31

    Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the…

18. Using the On-Screen Display (OSD) Menup. 34

    Accessing the Menu System NOTE: Any changes you make using the OSD menu are automatically saved if you move to another OSD menu, exit the OSD menu, or wait for…

19. Troubleshootingp. 52
20. Self-Testp. 52

    Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly…

21. Built-in Diagnosticsp. 54

    Your monitor has a built-in diagnostic tool that helps you determine if the screen abnormality you are experiencing is an inherent problem with your monitor…

22. Common Problemsp. 55

    The following table contains general information about common monitor problems you might encounter and the possible solutions: Common Symptoms What You…

23. Product Specific Problemsp. 56

    Specific Symptoms What You Experience Possible Solutions Screen image is too small Image is centered on screen, but does not fill entire viewing area • Check…

24. Universal Serial Bus (USB) Specific Problemsp. 57

    Specific Symptoms What You Experience Possible Solutions USB interface is not working USB peripherals are not working • Check that your monitor is turned ON. •…

25. Appendixp. 58

    Safety Instructions For displays with glossy bezels the user should consider the placement of the display as the bezel may cause disturbing reflections from…

26. Safety Instructionsp. 58

    For displays with glossy bezels the user should consider the placement of the display as the bezel may cause disturbing reflections from surrounding light and…

27. FCC Notices (U.S. only) and Other Regulatory Informationp. 58

    For FCC notices and other regulatory information, see the regulatory compliance website located at www.dell.com/regulatory_compliance

28. Contacting Dellp. 58

    NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog.…

29. Setting Up Your Monitorp. 59

    Setting Display Resolution to 2560 x 1600 (maximum) For best performance, set the display resolution to 2560 x 1600 pixels by performing the following steps…

30. Maintenance Guidelinesp. 61

    Cleaning Your Monitor WARNING: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet. CAUTION: Read and follow the Safety…