Loading manual…
Loading manual…
FCC Information 1. Use the attached specifi ed cables with this monitor so as not to interfere with radio and television reception. (1) The power supply cord…
To attach the Base to the LCD stand: 1. Place monitor face down on a non-abrasive surface (Figure 1). 2. Please rotate the stand 90 degrees as shown in Figure…
works controlling all connected sub monitors from master monitor simultaneously but also controlling a target monitor from master monitor by setting INDIVIDUAL…
You can connect multiple monitors by using DisplayPort daisy-chain connection. For using as multiple monitors in MST (multi-stream transport) mode, setting…
OSD (On-Screen Display) control keys on the back of the monitor function are as follows: To access OSD menu, press any of the control keys. To change signal…
DisplayPort: DisplayPort is designed to be the future-ready and scalable solution for high performance digital display connectivity. It enables the highest…
No picture • The signal cable should be completely connected to the display card/computer. • The display card should be completely seated in its slot. • The…
Allows you to use the entire screen area, signifi cantly expanding the size. Allows the picture displayed in the center to expand. SETUP 1. Select FULL or…
You can display a image by using multiple monitors with any input signals. [Example of V MONITOR 5, H MONITOR 5 (See page 20)] 1. Press the CENTER/EXIT key to…
Human sensing function reduces power consumption by detecting the movement of a person. The HUMAN SENSING has following two settings: MODE HUMAN SENSING…
The brightness of the LCD screen can be set to increase or decrease depending on the amount of ambient lighting within the room. If the room is bright, the…