Loading manual…
ATEN VanCryst™ (VS261) user manual
Open PDFOpens the file on objects.icecat.biz.
Contents
- Compliance Statementsp. 2
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital service…
- VS-261 / VS-461 User Manualp. 3
- Online Registrationp. 3
- Telephone Supportp. 3
Technical Support For international online technical support – including troubleshooting, documentation, and software updates: http://support.aten.com For…
- Technical Supportp. 3
For international online technical support – including troubleshooting, documentation, and software updates: http://support.aten.com For North American…
- Overviewp. 5
The 2 port VS261 and 4 port VS461 chart a revolutionary new direction in multimedia functionality by combining a Digital Visual Interface (DVI) Video Switch…
- Featuresp. 5
DVI video switch with stereo audio support Output sound and video signals from 2 (VS261) or 4 (VS461) DVI or analog video sources Compliant with the DVI…
- System Requirementsp. 6
Consoles A DVI display capable of the highest resolution that you will be using on any DVI output Stereo speakers for audio output Computers The following…
- Front Viewp. 8
No. Component Description 1 port selection pushbuttons Press a pushbutton to display video (playback audio) from the device attached to the corresponding port.…
- Rear Viewp. 9
No. Component Description 1 power jack The power adapter cable plugs in here. 2 video / audio output The output section is comprised of a DVI-I connector and…
- IR Remote Control Unitp. 10
No. Component Description 1 port up / port down Press these buttons to cycle among the source devices. 2 port selection pushbuttons Press a port selection…
- Installationp. 11
Refer to the installation diagram (the numbers in the diagrams correspond to the numbers of the steps) and do the following: 1. Plug your DVI display's…
- Video Port Switchingp. 12
There are two convenient methods for switching among video sources: Manual and the Remote Control. Manual Selection To select a source device, press and…
- Hot Pluggingp. 13
The VS261 / VS461 supports hot plugging - devices can be added and removed from the installation by plugging and unplugging their cables to and from the VS261…
- Powering Off and Restartingp. 13
If you power off the VS261 / VS461, before starting it back up you must do the following: 1. Shut down all the devices that are attached to it. 2. Unplug its…
- Specificationsp. 14
Function VS261 VS461 Video Input Interfaces 2 x DVI-I Female (White) 4 x DVI-I Female (White) Impedance 100 Ω Max. Distance 1.8 m Video Output Interfaces 1 x…
- Troubleshootingp. 15
Environment Operating Temp. 0–50ºC Storage Temp. -20–60ºC Humidity 0–80% RH, Non-condensing Physical Properties Housing Metal Weight 0.50kg (1.1 lb) 0.75kg…
- Limited Warrantyp. 16
ATEN warrants its hardware in the country of purchase against flaws in materials and workmanship for a Warranty Period of two [2] years (warranty period may…