iiyama G2530HSU user manual

Contents

1. FOR YOUR SAFETYp. 5

   FOR YOUR SAFETY WARNING STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug…

2. SPECIAL NOTES ON LCD MONITORSp. 7

   NOTE  If you have to return your unit for service and the original packaging has been discarded, please contact your dealer or iiyama service center for…

3. INSTALLATIONp. 9

   < WALL MOUNTING > WARNING  Before installation, make sure the wall, ceiling or desktop arm is strong enough to hold the necessary weight of the display and…

4. FITTING AND REMOVAL OF BASE : G-MASTER GB2530HSUp. 11

   CAUTION  Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped.  Do not give a strong impact to the monitor.…

5. FITTING AND REMOVAL OF BASE : G-MASTER G2530HSUp. 12
6. CONTROLS AND CONNECTORS : G-MASTER G2530HSUp. 14

   <Front> <Back> NOTE NOTE Power Indicator Blue: Normal operation Orange: Standby Mode Power Switch ( ) Menu / Select Button (ENTER) Scroll Up / Volume Button (…

7. CONNECTING YOUR MONITOR : G-MASTER GB2530HSUp. 15

   Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the monitor to the audio…

8. CONNECTING YOUR MONITOR : G-MASTER G2530HSUp. 16
9. DISCONNECTING YOUR MONITORp. 17
10. COMPUTER SETTINGp. 18

     For optimal viewing it is recommended to look at the full face of the monitor.  Hold the stand so that the monitor does not topple when you change the…

11. ADJUSTING THE VIEWING ANGLE : G-MASTER G2530HSUp. 18

    NOTE  Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.  Careful attention is required not to pinch your…

12. G-MASTER GB2530HSUp. 19

     For optimal viewing it is recommended to position yourself directly opposite to the full face of the monitor, then adjust the monitor’s height and angle to…

13. OPERATING THE MONITORp. 20

    To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 33. You are also able to adjust the…

14. ADJUSTMENT MENU CONTENTSp. 21

    Adjustment Item Problem / Option Button to Press Picture Adjust Too dark Too bright Brightness * 1,2,3 Contrast * 2 Too dull Too intense * 1 Adjust the…

15. SCREEN ADJUSTMENTSp. 28

     The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use.  The…

16. STANDBY FEATUREp. 31

    of this product complies with power saving requirement of ENERGY STAR ® and VESA DPMS. When activated, it automatically reduces unnecessary power consumption…

17. TROUBLE SHOOTINGp. 32

    1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult…

18. RECYCLING INFORMATIONp. 33

    The screen is shaking. The power voltage is within the specification of the monitor. The signal timing of the computer is within the specification of the…

19. APPENDIXp. 34

    Design and specifications are subject to change without prior notice

20. SPECIFICATIONS : G-MASTER GB2530HSUp. 34

    * USB peripherals and audio equipment are not connected. NOTE Size Category 25" LCD Panel Panel technology TN Size Diagonal: 24.5" (62.2cm) Pixel pitch 0.283mm…

21. SPECIFICATIONS : G-MASTER G2530HSUp. 35
22. DIMENSIONS : G-MASTER GB2530HSUp. 36

    557.5mm/21.9” 553.0mm/21.8” 309.0mm/12.2” 330.0mm/13.0” 240.0mm/9.4” 210.0mm/8.3” 52.5mm/2.0” 370.0mm/14.6”(500.0mm/19.7”) 379.5mm/14.9”…

23. DIMENSIONS : G-MASTER G2530HSUp. 36

    401.0mm/15.8” 221.0mm/8.7” 197.0mm/7.7” 557.5mm/21.9” 553.0mm/21.8” 330.0mm/13.0” 309.0mm/12.2” 52.5mm/2.0” DIMENSIONS : G-MASTER GB2530HSU 557.5mm/21.9”…

24. COMPLIANT TIMINGp. 37

    M184N21 Video Mode Horizontal Frequency Vertical Frequency Dot Clock 640 × 480 31.469kHz 59.940Hz 25.175MHz 800 × 600 37.879kHz 60.317Hz 40.000MHz 46.875kHz…