iiyama X2783HSU-B3 user manual

Contents

1. FOR YOUR SAFETYp. 6

   FOR YOUR SAFETY WARNING STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug…

2. SPECIAL NOTES ON LCD MONITORSp. 8

   NOTE If you have to return your unit for service and the original packaging has been discarded, please contact your dealer or iiyama service center for…

3. WALL MOUNTINGp. 10

   , in consideration of thickness of the mounting stage, tighten the M4 Screw with washer which “L” length is 7mm to fasten the monitor. Using the screw longer…

4. FITTING AND REMOVAL OF BASE : ProLite XB2783HSUp. 11

   CAUTION  Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped.  Do not give a strong impact to the monitor.…

5. FITTING AND REMOVAL OF BASE : ProLite X2783HSUp. 12
6. CONTROLS AND CONNECTORS : ProLite X2783HSUp. 14

   <Front> <Back> Power Indicator Blue: Normal operation Orange: Power Management Power Switch ( ) Menu / Select Button (MENU) Scroll Up / Volume Button ( / )…

7. CONNECTING YOUR MONITOR : ProLite XB2783HSUp. 15

   Ensure that both the computer and the monitor are switched off . Connect the computer to the monitor with the signal cable. Connect the monitor to the audio…

8. CONNECTING YOUR MONITOR : ProLite X2783HSUp. 16
9. COMPUTER SETTINGp. 17

    For optimal viewing it is recommended to look at the full face of the monitor.  Hold the stand so that the monitor does not topple when you change the…

10. ADJUSTING THE VIEWING ANGLE : ProLite X2783HSUp. 17

    NOTE  Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.  Careful attention is required not to catch your fi…

11. PANEL ROTATION : ProLite XB2783HSUp. 18

    Adjust the monitor’s height. Rotate the panel 90 degrees. Portrait: Turn clockwise. Landscape: Turn counter clockwise.  Attempting to rotate without fully…

12. OPERATING THE MONITORp. 19

    To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 31. You are also able to adjust the…

13. ADJUSTMENT MENU CONTENTSp. 20

    Adjustment Item Problem / Option Button to Press Picture Adjust * 3 Too dark Too bright Brightness * 1,2,4 Contrast * 2 Too dull Too intense * 1 Adjust the…

14. SCREEN ADJUSTMENTSp. 27

     The screen adjustments described in this manual are designed to set image position and minimize fl icker or blur for the particular computer in use.  The…

15. POWER MANAGEMENT FEATUREp. 30

    may not work properly. NOTE POWER MANAGEMENT FEATURE Power Management Mode When the H-sync signal / V-sync signal / H and V sync signals from the computer…

16. TROUBLE SHOOTINGp. 31

    1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult…

17. RECYCLING INFORMATIONp. 32

    The screen is shaking. The power voltage is within the specifi cation of the monitor. The signal timing of the computer is within the specifi cation of the…

18. APPENDIXp. 33

    Design and specifi cations are subject to change without prior notice

19. SPECIFICATIONS : ProLite XB2783HSUp. 33

    * Audio/USB equipment is not connected. NOTE Size Category 27" LCD Panel Panel technology AMVA+ Size Diagonal: 27" (68.6cm) Pixel pitch 0.311mm H × 0.311mm V…

20. SPECIFICATIONS : ProLite X2783HSUp. 34
21. DIMENSIONS : ProLite XB2783HSUp. 35

    599.5mm/23.6” 622.5mm/24.5” 338.0mm/13.3” 372.5mm/14.7” 300.0mm/11.8” 230.0mm/9.1” 400.5mm/15.8”(530.5mm/20.9”) 56.5mm/2.2” 599.5mm/23.6” 622.5mm/24.5”…

22. DIMENSIONS : ProLite X2783HSUp. 35
23. COMPLIANT TIMINGp. 36

    * 1 HDMI/DisplayPort input only. * 2 Analog input only. NOTE Video Mode Horizontal Frequency Vertical Frequency Dot Clock VESA VGA 640 × 480 31.469kHz 59.940Hz…