iiyama XUB2292HS-B1 user manual

Contents

1. FOR YOUR SAFETYp. 5

   FOR YOUR SAFETY WARNING STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug…

2. SPECIAL NOTES ON LCD MONITORSp. 7

   NOTE  If you have to return your unit for service and the original packaging has been discarded, please contact your dealer or iiyama service center for…

3. INSTALLATIONp. 9

   < WALL MOUNTING > WARNING  Before installation, make sure the wall, ceiling or desktop arm is strong enough to hold the necessary weight of the display and…

4. ProLite XUB2294HSU / ProLite XUB2294HS / ProLite XUB2292HSp. 11

   CAUTION  Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped.  Do not give a strong impact to the monitor.…

5. ProLite XU2294HSU / ProLite XU2294HS / ProLite XU2292HSp. 12
6. CONNECTING YOUR MONITOR : ProLite XUB2294HSUp. 15

   Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the monitor to the audio…

7. CONNECTING YOUR MONITOR : ProLite XUB2294HS / ProLite XUB2294HSp. 16
8. CONNECTING YOUR MONITOR : ProLite XU2294HSUp. 17
9. CONNECTING YOUR MONITOR : ProLite XU2294HS / ProLite XU2292HSp. 18
10. COMPUTER SETTINGp. 19
11. ProLite XUB2294HSU / ProLite XUB2294HS / ProLite XUB2292HSp. 19

     For optimal viewing it is recommended to position yourself directly opposite to the full face of the monitor, then adjust the monitor’s height and angle to…

12. ProLite XU2294HSU / ProLite XU2294HS / ProLite XU2292HSp. 20

    NOTE  Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.  Careful attention is required not to pinch your…

13. OPERATING THE MONITORp. 21

    OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 41. You are…

14. ADJUSTMENT MENU CONTENTSp. 22

    Adjustment Item Problem / Option Button to Press Auto Adjust Auto Adjust * Adjust H. / V. Position, Clock and Phase automatically. ProLite XUB2294HSU AUTO…

15. SCREEN ADJUSTMENTSp. 32

     The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use.  The…

16. POWER MANAGEMENT FEATUREp. 35

    may not work properly. NOTE POWER MANAGEMENT FEATURE  Power Management Mode When the H-sync signal / V-sync signal / H and V sync signals from the computer…

17. TROUBLE SHOOTINGp. 36

    1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult…

18. RECYCLING INFORMATIONp. 37

    The screen is shaking. The power voltage is within the specification of the monitor. The signal timing of the computer is within the specification of the…

19. APPENDIXp. 38

    Design and specifications are subject to change without prior notice

20. SPECIFICATIONS : ProLite XUB2294HSUp. 38

    * USB peripherals and audio-video equipment are not connected. NOTE Size Category 22" LCD Panel Panel technology VA Size Diagonal: 21.5" (54.6cm) Pixel pitch…

21. SPECIFICATIONS : ProLite XUB2294HSp. 39

    * Audio-video equipment is not connected. NOTE Size Category 22" LCD Panel Panel technology VA Size Diagonal: 21.5" (54.6cm) Pixel pitch 0.248mm H × 0.248mm V…

22. SPECIFICATIONS : ProLite XUB2292HSp. 40
23. SPECIFICATIONS : ProLite XU2294HSUp. 41
24. SPECIFICATIONS : ProLite XU2294HSp. 42
25. SPECIFICATIONS : ProLite XU2292HSp. 43
26. ProLite XUB2294HSU / ProLite XUB2294HS / ProLite XUB2292HSp. 44

    484.0mm/19.1” 488.5mm/19.2” 273.5mm/10.8” 294.5mm/11.6” 52.5mm/2.1” 376.0mm/14.8” 207.0mm/8.2” 187.0mm/7.4” ( ) : Maximum adjustment range DIMENSIONS: ProLite…

27. COMPLIANT TIMINGp. 45

    * 1 HDMI/DisplayPort input only. * 2 Analog input only. NOTE Video Mode Horizontal Frequency Vertical Frequency Dot Clock 640 × 480 31.469kHz 59.940Hz…