Zebra TC57 (TC57HO-1PEZU4P-A6) quick start guide

Contents

1. Copyrightp. 2

   ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the…

2. Terms of Usep. 2

   Proprietary Statement This manual contains proprietary information of Zebra Technologies Corporation and its subsidiaries (“Zebra Technologies”). It is…

3. Proprietary Statementp. 2

   This manual contains proprietary information of Zebra Technologies Corporation and its subsidiaries (“Zebra Technologies”). It is intended solely for the…

4. Product Improvementsp. 2

   Continuous improvement of products is a policy of Zebra Technologies. All specifications and designs are subject to change without notice

5. Liability Disclaimerp. 2

   Zebra Technologies takes steps to ensure that its published Engineering specifications and manuals are correct; however, errors do occur. Zebra Technologies…

6. Limitation of Liabilityp. 2

   In no event shall Zebra Technologies or anyone else involved in the creation, production, or delivery of the accompanying product (including hardware and…

7. Provide Documentation Feedbackp. 2

   If you have comments, questions, or suggestions about this guide, send an email to EVM-Techdocs@zebra.com.

8. Featuresp. 3

   PTT Button Scan Button Microphone Interface Connector Speaker Touch Screen Light Sensor Charging/Notification LED Proximity Sensor Microphone Data Capture LED…

9. Installing a microSD Cardp. 4

   The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack. Refer to the documentation provided with the card…

10. Installing the SIM Cardp. 6

    NOTE: Only use a nano SIM card. Not applicable to TC57JO. CAUTION: For proper electrostatic discharge (ESD) precautions to avoid damaging the SIM card. Proper…

11. Installing the Batteryp. 9

    NOTE: User modification of the device, particularly in the battery well, such as labels, asset tags, engravings, stickers, etc., may compromise the intended…

12. Charging the Devicep. 9

    Use one of the following accessories to charge the device and/or spare battery. Table 1 Charging and Communication Description Part Number Charging…

13. Charging the Spare Batteryp. 10

    1. Insert a spare battery into the spare battery slot. 2. Ensure the battery is seated properly. The Spare Battery Charging LED blinks indicating charging. See…

14. 1-Slot USB Charging Cradlep. 11

    Solid Red Charging complete but the battery is at end of useful life. Fast Blinking Amber (2 blinks/second) Charging error, e.g.: • Temperature is too low or…

15. 5-Slot Charge Only Cradlep. 12

    Power LED Device Charging Slot

16. 4-Slot Charge Only Cradle with Battery Chargerp. 13

    Spare Battery Charging LED Power LED Spare Battery Slot Device Charging Slot

17. 5-Slot Ethernet Cradlep. 14

    4-Slot Battery Charger 1000 LED Device Charging Slot 100/100 LED Spare Battery Charging LEDs (4) Power LED Spare Battery Slot

18. 4-Slot Battery Chargerp. 14

    1000 LED Device Charging Slot 100/100 LED Spare Battery Charging LEDs (4) Power LED Spare Battery Slot

19. Rugged Charge/USB Cablep. 15
20. Scanningp. 16

    To read a bar code, a scan-enabled application is required. The device contains the DataWedge application that allows the user to enable the imager, decode the…

21. Ergonomic Considerationsp. 17

    Pick List Mode with Multiple Barcodes in Aiming Pattern AVOID EXTREME WRIST ANGLES