Hannspree AG493UCX user manual

Contents

1. Safetyp. 3

   National Conventions The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide…

2. National Conventionsp. 3

   The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be…

3. Powerp. 4

   The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home…

4. Installationp. 5

   Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this…

5. Cleaningp. 6

   Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet.…

6. Otherp. 7

   If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center. Make sure that the ventilating…

7. Setupp. 8

   Contents in Box * * * * * * Not all signal cables will be provided for all countries and regions. Please check with the local dealer or AOC branch office for…

8. Setup Stand & Basep. 9

   Please setup or remove the base following the steps as below. Setup: Remove:

9. Adjusting the monitorp. 10

   For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. Hold the stand so you…

10. Connecting the Monitorp. 11
11. Adaptive-Sync functionp. 12

    1. Adaptive-Sync function is working with DP 2. Compatible Graphics Card: Recommend list is as the below, also could be checked by visiting www.AMD.com •…

12. HDRp. 13

    It is compatible with input signals in HDR10 format. The display may automatically activate the HDR function if the player and content are compatible. Please…

13. Adjustingp. 14

    Hotkeys 1 2 3 4 5 1 Source/Up 2 Dial Point/Down 3 Game Mode/Left 4 Shadow Control /Right 5 Power/ Menu/Enter Power/Menu/Enter Press the Power button to turn on…

14. Hotkeysp. 14

    2 3 4 5 1 Source/Up 2 Dial Point/Down 3 Game Mode/Left 4 Shadow Control /Right 5 Power/ Menu/Enter Power/Menu/Enter Press the Power button to turn on the…

15. Description of the remote control buttonsp. 15
16. OSD Key Guide (Menu)p. 16

    Enter Move Exit Enter : Use Enter key to enter the next OSD level Move : Use Left / Up / Down key to move OSD selection Exit : Use Right key to exit OSD Enter…

17. OSD Settingp. 18

    Basic and simple instruction on the control keys. Enter Move Exit OSD Setup Extras 1). Press the MENU-button to activate the OSD window. 2). Follow Key Guide…

18. LED Indicatorp. 26

    Status LED Color Full Power Mode White Active-off Mode White (blinking)

19. Troubleshootp. 27

    Problem & Question Possible Solutions Power LED Is Not ON Make sure the power button is ON and the Power Cord is properly connected to a grounded power outlet…

20. Specificationp. 28

    General Specification Panel Model name AG493UCX Driving system TFT Color LCD Viewable Image Size 124 cm diagonal Pixel pitch 0.2331mm(H) x 0.2331mm(V) Video…

21. General Specificationp. 28

    Panel Model name AG493UCX Driving system TFT Color LCD Viewable Image Size 124 cm diagonal Pixel pitch 0.2331mm(H) x 0.2331mm(V) Video HDMI /DP/USB-C Display…

22. Preset Display Modesp. 29
23. Pin Assignmentsp. 30

    19-Pin Color Display Signal Cable Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name 1. TMDS Data 2+ 9. TMDS Data 0- 17. DDC/CEC Ground 2. TMDS Data 2…

24. Plug and Playp. 31

    Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host…