StarTech.com Wall-Mount Monitor Arm (ARMWALLDS2) user manual

Contents

1. Compliance Statementsp. 2

   Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols This manual may make reference to trademarks, registered trademarks, and other…

2. Warning Statementsp. 3

   Make sure that you assemble this product according to the instructions. • Do not exceed the weight capacity of this product. Overloading this product might…

3. Safety Statementsp. 6

   Safety Measures • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards. Mesures de…

4. Product Diagramp. 8

   Decorative Cap 3 Swivel Arm 2 Wall-Mount Bracket 4 Monitor Mount 1 2 3 4

5. Product Dimensions/Rotationp. 9
6. Product Informationp. 10

   Specifications Type of Measurement Measurement VESA Mounting Hole Pattern 75x75 100x100 Tilt +900 to -150 Screen Size Maximum 30 in. (762 mm) Rotate 3600

7. Specificationsp. 10

   Type of Measurement Measurement VESA Mounting Hole Pattern 75x75 100x100 Tilt +900 to -150 Screen Size Maximum 30 in. (762 mm) Rotate 3600

8. Requirementsp. 13

   Phillips Head Screwdriver x 1 • Writing Utensil x 1 • Level x 1

9. Installationp. 13

   Mounting the Wall Mount Notes: Product mounting should be completed by a certi­ fied professional as per the local safety and building code guidelines. Wall…

10. Mounting the Wall Mountp. 13

    Notes: Product mounting should be completed by a certi­ fied professional as per the local safety and building code guidelines. Wall structures vary, and it’s…

11. Attaching the Swivel Armp. 15

    1. Align the Mounting Hole on the Swivel Arm with the Mounting Peg on the Wall-Mount Bracket. 2. Slide the Mounting Hole on the Swivel Arm over the Mounting…

12. Removing the Swivel Armp. 16

    1. Slide the Thumb Clip away from the Swivel Arm, disengaging the locking mechanism. Thumb Clip 2. While holding the Thumb Clip and the weight of the Swivel…

13. Attaching a Monitorp. 17

    1. Align the Mounting Holes (x 4) on the Monitor Mount with the mounting holes on the back of the Monitor. 2. Insert the Hand Screws through the Monitor Mount…

14. Attaching the Monitor Mountp. 17

    Notes: Attaching the Monitor Mount may require two people. The Wall Mount supports up to a maximum of 30.8 lb. (14 kg).

15. Removing the Monitor Mountp. 19

    1. Slide the Thumb Clip towards the Swivel Arm, disengaging the locking mechanism. Thumb Clip 2. While holding the Thumb Clip and the weight of the Monitor…

16. Adjusting the Monitor Tiltp. 19

    While supporting the weight of the Monitor, use the Hex Key (included) to loosen or tighten the Hex Screw on the side of the Monitor Mount, until the tension…