StarTech.com ET10GSFP user manual

Contents

1. Introductionp. 4

   Packaging contents • 1x 10GbE Ethernet fiber media converter • 1x universal power adapter • 4x power cords (NA/EU/UK/AU) • 1x quick start guide

2. System requirementsp. 4

   MSA-compliant 10 Gigabit SFP+ transceiver module (Mini-GBIC) • 10GbE network equipment (for example, a network switch) • RJ45-terminated UTP Cat6a or better…

3. Product diagramp. 5
4. Front viewp. 5

   Rear view 10Gb RJ45 SFP+ slot LEDs Management type switch Card slot 2 RJ45 LEDs DC power input Slot selection swich Card slot 1 DB9 RS232 (serial console…

5. Rear viewp. 5

   10Gb RJ45 SFP+ slot LEDs Management type switch Card slot 2 RJ45 LEDs DC power input Slot selection swich Card slot 1 DB9 RS232 (serial console command) Thumb…

6. Install the media converterp. 6

   1. Turn off any networking equipment that will be connected to the media converter. 2. Insert a 10 Gigabit MSA-compliant SFP+ module into media converter’s…

7. Installing a second SFP card modulep. 7

   By default, the media converter’s SFP+ card module is preinstalled into slot 2. The media converter features a secondary slot (slot 1), which lets you install…

8. Remove a card module from another media converterp. 7

   If you’re installing a card module from one of the ET91000 media converters, you may need to remove the card module from that media converter’s chassis. • Turn…

9. Install a second SFP card modulep. 7

   Follow the instructions below to install a second SFP card module into the media converter’s slot 1: 1. Turn the screw counterclockwise, using a Phillips…

10. Managing the media converterp. 8

    The media converter features two slots: • Slot 1: Expansion slot for installing another SFP/SFP+ card module • Slot 2: Preinstalled SFP+ card module The media…

11. Using the management switchesp. 8

    The media converter features two switches on the rear: • Slot selection (left switch): selects which slot to control (slot 1 or slot 2). • Management type…

12. Switch configuration options:p. 8

    The SFP+ card module is installed in slot 2. The media converter is managed by the console. (Default) A SFP+ card module is installed in slot 1. The media…

13. Using the serial console command portp. 9

    The media converter features a DB9 (RS232 serial) port, which enables console-based management commands, for enhanced customization and control of the…

14. Technical supportp. 10

    StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product…

15. Warranty informationp. 10

    This product is backed by a two-year warranty. StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following…