iiyama GB2730HSU-B1 user manual

Contents

1. FOR YOUR SAFETYp. 5

   FOR YOUR SAFETY WARNING STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug…

2. SPECIAL NOTES ON LCD MONITORSp. 7

   NOTE  If you have to return your unit for service and the original packaging has been discarded, please contact your dealer or iiyama service center for…

3. WALL MOUNTINGp. 9

   , in consideration of thickness of the mounting stage, tighten the M4 Screw with washer which “L” length is 7mm to fasten the monitor. Using the screw longer…

4. FITTING AND REMOVAL OF BASE : G-MASTER GB2730HSUp. 10

   CAUTION  Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped.  Do not give a strong impact to the monitor.…

5. FITTING AND REMOVAL OF BASE : G-MASTER G2730HSUp. 11
6. CONTROLS AND CONNECTORS : G-MASTER G2730HSUp. 13

   <Front> <Back> NOTE NOTE Power Indicator Blue: Normal operation Orange: Power Management Power Switch ( ) Menu / Select Button (ENTER) Scroll Down / Volume…

7. CONNECTING YOUR MONITOR : G-MASTER GB2730HSUp. 14

   Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the monitor to the audio…

8. CONNECTING YOUR MONITOR : G-MASTER G2730HSUp. 15
9. COMPUTER SETTINGp. 16

    For optimal viewing it is recommended to look at the full face of the monitor.  Hold the stand so that the monitor does not topple when you change the…

10. ADJUSTING THE VIEWING ANGLE : G-MASTER G2730HSUp. 16

    NOTE  Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.  Careful attention is required not to catch your…

11. G-MASTER GB2730HSUp. 17

     For optimal viewing it is recommended to position yourself directly opposite to the full face of the monitor, then adjust the monitor’s height and angle to…

12. PANEL ROTATION : G-MASTER GB2730HSUp. 17

    Adjust the mother’s height. Rotate the panel 90 degrees. Portrait: Turn clockwise. Landscape: Turn counter clockwise.  Attempting to rotate without fully…

13. OPERATING THE MONITORp. 18

    To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 31. You are also able to adjust the…

14. ADJUSTMENT MENU CONTENTSp. 19

    Adjustment Item Problem / Option Button to Press Picture Adjust Too dark Too bright Brightness * 1,2,3 Contrast * 2 Too dull Too intense * 1 Adjust the…

15. SCREEN ADJUSTMENTSp. 26

     The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use.  The…

16. POWER MANAGEMENT FEATUREp. 29

    may not work properly. NOTE POWER MANAGEMENT FEATURE  Power Management Mode When the H-sync signal / V-sync signal / H and V sync signals from the computer…

17. TROUBLE SHOOTINGp. 30

    1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult…

18. RECYCLING INFORMATIONp. 31

    The screen is shaking. The power voltage is within the specification of the monitor. The signal timing of the computer is within the specification of the…

19. APPENDIXp. 32

    Design and specifications are subject to change without prior notice

20. SPECIFICATIONS : G-MASTER GB2730HSUp. 32

    * Audio/USB equipment is not connected. NOTE Size Category 27" LCD Panel Panel technology TN Size Diagonal: 27" (68.6cm) Pixel pitch 0.311mm H × 0.311mm V…

21. SPECIFICATIONS : G-MASTER G2730HSUp. 33
22. DIMENSIONS : G-MASTER GB2730HSUp. 34

    613.5mm/24.2” 609.0mm/24.0” 342.0mm/13.5” 370.5mm/14.6” 300.0mm/11.8” 230.0mm/9.1” 54.0mm/2.1” 397.5mm/15.6”(527.5mm/20.8”) ( ) : Maximum adjustment range

23. DIMENSIONS : G-MASTER G2730HSUp. 34

    613.5mm/24.2” 609.0mm/24.0” 370.5mm/14.6” 342.0mm/13.5” 221.0mm/8.7” 197.0mm/7.7” 54.0mm/2.1” 440.5mm/17.3”

24. COMPLIANT TIMINGp. 35

    Video Mode Horizontal Frequency Vertical Frequency Dot Clock VESA VGA 640 × 480 31.469kHz 59.940Hz 25.175MHz SVGA 800 × 600 37.879kHz 60.317Hz 40.000MHz…