iiyama XU2792HSU (XU2792HSU-B1) user manual

Contents

1. FOR YOUR SAFETYp. 6

   FOR YOUR SAFETY WARNING STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug…

2. SPECIAL NOTES ON LCD MONITORSp. 8

   NOTE  If you have to return your unit for service and the original packaging has been discarded, please contact your dealer or iiyama service center for…

3. INSTALLATIONp. 10

   < WALL MOUNTING > WARNING  Before installation, make sure the wall, ceiling or desktop arm is strong enough to hold the necessary weight of the display and…

4. FITTING AND REMOVAL OF BASE : ProLite XUB2792HSUp. 12

   CAUTION  Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped.  Do not give a strong impact to the monitor.…

5. FITTING AND REMOVAL OF BASE : ProLite XU2792HSUp. 13
6. CONTROLS AND CONNECTORS : ProLite XU2792HSUp. 15

   <Front> <Back> NOTE NOTE Power Indicator Blue: Normal operation Orange: Power Management Power Switch ( ) Menu / Select Button (ENTER) Scroll Up / Volume…

7. CONNECTING YOUR MONITOR : ProLite XUB2792HSUp. 16

   Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the monitor to the audio…

8. CONNECTING YOUR MONITOR : ProLite XU2792HSUp. 17
9. COMPUTER SETTINGp. 18
10. ProLite XUB2792HSUp. 18

     For optimal viewing it is recommended to position yourself directly opposite to the full face of the monitor, then adjust the monitor’s height and angle to…

11. ADJUSTING THE VIEWING ANGLE : ProLite XU2792HSUp. 19

    NOTE  Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.  Careful attention is required not to pinch your…

12. OPERATING THE MONITORp. 20

    To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 35. You are also able to adjust the…

13. ADJUSTMENT MENU CONTENTSp. 21

    Adjustment Item Problem / Option Button to Press Auto Adjust Auto Adjust * Adjust Horizontal / Vertical Position, Clock and Phase automatically. ProLite…

14. SCREEN ADJUSTMENTSp. 31

     The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use.  The…

15. POWER MANAGEMENT FEATUREp. 34

    may not work properly. NOTE POWER MANAGEMENT FEATURE  Power Management Mode When the H-sync signal / V-sync signal / H and V sync signals from the computer…

16. TROUBLE SHOOTINGp. 35

    1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult…

17. RECYCLING INFORMATIONp. 36

    The screen is shaking. The power voltage is within the specification of the monitor. The signal timing of the computer is within the specification of the…

18. APPENDIXp. 37

    Design and specifications are subject to change without prior notice

19. SPECIFICATIONS : ProLite XUB2792HSUp. 37

    * Audio/USB equipment is not connected. NOTE Size Category 27" LCD Panel Panel technology IPS Panel Technology Size Diagonal: 27" (68.6cm) Pixel pitch 0.311mm…

20. SPECIFICATIONS : ProLite XU2792HSUp. 38
21. DIMENSIONS : ProLite XUB2792HSUp. 39

    612.0mm/24.1” 606.0mm/23.9” 364.5mm/14.4” 341.5mm/13.4” 300.0mm/11.8” 230.0mm/9.1” 54.0mm/2.1” 397.0mm/15.6” (527.0mm/20.7”) ( ) : Maximum adjustment range

22. DIMENSIONS : ProLite XU2792HSUp. 39

    221.0mm/8.7” 197.0mm/7.7” 435.0mm/17.1” 612.0mm/24.1” 606.0mm/23.9” 364.5mm/14.4” 341.5mm/13.4” 54.0mm/2.1”

23. COMPLIANT TIMINGp. 40

    Video Mode Horizontal Frequency Vertical Frequency Dot Clock 640 × 480 31.469kHz 59.940Hz 25.175MHz 800 × 600 37.879kHz 60.317Hz 40.000MHz 46.875kHz 75.000Hz…