Loading manual…
Loading manual…
Pole Cap 6 Crossbar 7 Height-Adjustment Ring 8 Cable-Management Clip (Pole) 5 7 6 8
Package Contents Pole Qty: One Baseplate Qty: One M6x15 mm Screws Qty: Three Cable- Management Clip (Pole) Qty: One Pole Cap Qty: One Height- Adjustment Ring…
Warning! Make sure that all of the hardware is assembled se curely and checked for stability before you load the monitors
1. Insert the M6x15 mm Screws through the three holes in the Baseplate and into the Pole (Figure 1). 2. Use the M4 Hex Key and turn the M6x15 mm Screws…
1. Slide the Height-Adjustment Ring down the Pole to the desired height. Note: The Height-Adjustment Ring uses a ratchet-style fastening system. Pull the Lever…
Warning! ARMDUOSS is designed to display two Monitors between 15 and 24 inches in size. The maximum weight capacity of ARMDUOSS is a total of 35.2 lb. (16 kg)…
Tilt Adjustment The Monitors can be tilted to accommodate different viewing angles (15 degrees downward or upward). • Place both of your hands on either side…
The Monitors can be tilted to accommodate different viewing angles (15 degrees downward or upward). • Place both of your hands on either side of the Monitor…
If the Monitors are not staying in place, the Hex Screw on the back of the VESA Monitor Mount will need to be tightened. This Hex Screw may also need to be…
ARMDUOSS comes with Cable-Management Clips that you can use to direct the Monitor Cables along the Crossbar and down the Pole so that they are out of your way.…
This product is backed by a five-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.…