Loading manual…
Loading manual…
IMPORTANT! This manual contains important safety instructions that must be followed during the installation and maintenance of the UPS and batteries. Read this…
The Liebert® GXT5 is a compact, online uninterruptible power system (UPS) that continuously conditions and regulates its output voltage. The Liebert® GXT5…
Do not start the UPS until after the installation is finished, the system is commissioned by an authorized engineer, and the external-input circuit breakers…
3.1. Silencing the Audible Alarm The audible alarm may sound during UPS operation. To silence the alarm, press and hold the ESC button for 2 seconds. The…
The operation/display panel includes LED indicators, function keys, and an LCD interface to configure and control UPS operation. Figure 4-1 UPS Front-panel…
WARNING! Risk of electric shock Can cause equipment damage, injury and death. A battery can present a risk of electrical shock and high shortcircuit current.…
This section indicates various UPS symptoms you may encounter and provides a troubleshooting guide in the event the UPS develops a problem. Use the following…
The GXT5 product links the FreeRTOS software with Vertiv Group Corporation’s proprietary modules that communicate with the FreeRTOS software solely through the…
Our Technical Support staff is ready to assist you with any installation or operating issues you may encounter with your Liebert® product. Please call or…
Vertiv | Liebert® GXT5™ | Installer/User Guide 5 1.3. Rear Panels The following figures detail the rear-panel features for each GXT5 model. Figure 1-2…
Vertiv | Liebert® GXT5™ | Installer/User Guide 13 Figure 1-10 PD5-CE10HDWRMBS for GXT5-8000/10KIRT5UXLN (XLE) ITEM DESCRIPTION 1 POD Panel view (on rear of…
GXT5 Description 14 1.6. Battery Cabinet Optional battery cabinets are available for the UPS, and include a single battery-connector cable. Up to 10 battery…
GXT5 Description 16 1.8. UPS States and Operating Modes NOTE: See LED Indicators on page 49, for description of the run-indicator and alarm-indicator LEDs…
Vertiv | Liebert® GXT5™ | Installer/User Guide 17 1.8.2. Bypass Mode Bypass mode supplies power to the load from the bypass source (utility power) if an…
Vertiv | Liebert® GXT5™ | Installer/User Guide 19 1.8.4. ECO Mode NOTE: ECO mode is only available on a single-UPS system. The energy-saving ECO mode reduces…
Installation 22 2.3. Installing the UPS The UPS may be installed as a tower or in a rack, depending on available space and use considerations. Determine the…
Vertiv | Liebert® GXT5™ | Installer/User Guide 23 2.4. Installing External Battery Cabinets Optional, external battery cabinets (EBC) may be connected in…
Vertiv | Liebert® GXT5™ | Installer/User Guide 33 Figure 2-10 1-in 1-out Common-source Connection, 16-kVA and 20-kVA models ITEM DESCRIPTION 1 Output 2 Bypass…