iiyama B2875UHSU-B1 user manual

Contents

1. FOR YOUR SAFETYp. 5

   FOR YOUR SAFETY WARNING STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug…

2. SPECIAL NOTES ON LCD MONITORSp. 7

   NOTE If you have to return your unit for service and the original packaging has been discarded, please contact your dealer or iiyama service center for…

3. BEFORE YOU OPERATE THE MONITORp. 8

   The following accessories are included in your package. Check to see if they are enclosed with the monitor. If anything is missing or damaged, please contact…

4. FEATURESp. 8

    Supports Resolutions up to 3840 × 2160  High Contrast 1000:1 (Typical), Adv. Contrast Function Available / Brightness 300cd/m 2 (Typical) / Quick Respons…

5. CHECKING THE CONTENTS OF THE PACKAGEp. 8

   CAUTION FEATURES  Supports Resolutions up to 3840 × 2160  High Contrast 1000:1 (Typical), Adv. Contrast Function Available / Brightness 300cd/m 2 (Typical) /…

6. WALL MOUNTINGp. 9

   , in consideration of thickness of the mounting stage, tighten the M4 Screw with washer which “L” length is 7mm to fasten the monitor. Using the screw longer…

7. FITTING AND REMOVAL OF BASEp. 10

   CAUTION  Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped.  Do not give a strong impact to the monitor.…

8. CONNECTING YOUR MONITORp. 12

   Ensure that both the computer and the monitor are switched off . Connect the computer to the monitor with the signal cable. Connect the monitor to the audio…

9. COMPUTER SETTINGp. 13

   ADJUSTING THE HEIGHT AND THE VIEWING ANGLE  For optimal viewing it is recommended to position yourself directly opposite to the full face of the monitor, then…

10. ADJUSTING THE HEIGHT AND THE VIEWING ANGLEp. 13

     For optimal viewing it is recommended to position yourself directly opposite to the full face of the monitor, then adjust the monitor’s height and angle to…

11. OPERATING THE MONITORp. 14

    To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 26. You are also able to adjust the…

12. ADJUSTMENT MENU CONTENTSp. 15

    Adjustment Item Problem / Option Button to Press Luminance Too dark Too bright Brightness * 1 Contrast Too dull Too intense * 1 Adjust the Brightness when you…

13. SCREEN ADJUSTMENTSp. 22

     The screen adjustments described in this manual are designed to set image position and minimize fl icker or blur for the particular computer in use.  The…

14. POWER MANAGEMENT FEATUREp. 25

    may not work properly. NOTE POWER MANAGEMENT FEATURE Power Management Mode When the H-sync signal / V-sync signal / H and V sync signals from the computer…

15. TROUBLE SHOOTINGp. 26

    1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult…

16. RECYCLING INFORMATIONp. 27

    The screen is shaking. The power voltage is within the specifi cation of the monitor. The signal timing of the computer is within the specifi cation of the…

17. APPENDIXp. 28

    Design and specifi cations are subject to change without prior notice

18. SPECIFICATIONSp. 28

    * Audio/USB/MHL equipments are not connected. NOTE Size Category 28" LCD Panel Panel technology TN Size Diagonal: 28" (71cm) Pixel pitch 0.16mm H × 0.16mm V…

19. DIMENSIONSp. 29

    300.0mm/11.8” 230.0mm/9.1” 49.5mm/1.9” 410.5mm/16.2”(540.5mm/21.3”) 659.5mm/26.0” 624.0mm/24.6” 391.0mm/15.4” 344.0mm/13.5” ( ) : Maximum adjustment range…

20. COMPLIANT TIMINGp. 30

    M190A21 * 1 DVI, HDMI and DisplayPort input only. * 2 HDMI and DisplayPort input only. * 3 Recommended to use on PbP mode. NOTE Video Mode Horizontal Frequency…