StarTech.com Desk Mount Dual Monitor Arm (ARMDUAL2) user manual

Contents

1. Warning Statementsp. 3

   Make sure that you assemble this product according to the instructions. • Do not exceed the weight capacity of this product. Overloading this product might…

2. Product Diagramp. 6
3. Product Dimensionsp. 7
4. Product Informationp. 8

   Package Contents VESA Mounts Qty: Two Swivel Arm Assembly Qty: One C-Clamp Assembly Qty: One Pole Qty: One

5. Product Specificationsp. 12

   VESA 75 x 75 100 x 100 LB kg Total Weight (two monitors) 35.2 lb. (2 x 8 kg) Screen Size Max. 32 “ Rotation 360o

6. Requirementsp. 13

   Phillips Head Screwdriver x 1 • Monitors x 2 • Mounting Surface x 1

7. Mounting the Monitor Arm Using the C-Clampp. 14

   1. Insert the Pole Cap into the top of the Pole. Installing the Pole Cap 2. Slide the Cable Management Clips onto of the pole. - or - Clip the Cable Management…

8. Using the Grommet Mountp. 18
9. Attaching the Monitors (Flush)p. 25

   Note: It is recommend that two people are used to mount the Monitors to the Monitor Mounts. 1. Determine the size and length of screw to use to mount the…

10. Attaching the Monitors (Recessed)p. 27
11. Mounting the Monitorsp. 29

    1. While supporting the weight of the Monitor, slide the VESA Mount down onto the Swivel Arm Assembly, aligning the hole on the Mounting Flange (located on the…

12. Adjusting the Monitorsp. 31

    Tilt Adjustment 1. Using the 6 mm Hex Key, loosen the Adjustment Screw that is located on the side of the Monitor Mount.

13. Tilt Adjustmentp. 31

    1. Using the 6 mm Hex Key, loosen the Adjustment Screw that is located on the side of the Monitor Mount.

14. Micro Adjustmentsp. 32

    Making micro adjustments will slightly move the monitor up and down. • Insert the 6 mm Hex Key into the centertop of the Micro- Adjustment Knob and turn the…

15. Routing the Cablesp. 34

    Monitor Cables can be routed along the Swivel Arm Assembly through the Cable Management Clips along the Swivel Arm Assembly and down along the Pole through the…