D-Link Wireless AC1200 Wave2 Dual Band Indoor PoE Access Point (DAP-2662) user manual

Contents

1. Nuclias Connectp. 4

   Nuclias Connect Introduction Nuclias Connect is D-Link’s centralized management solution for Small-to-Medium-Sized Business (SMB) networks. Nuclias Connect…

2. Hardware Overviewp. 7

   Hardware Overview LEDs Connections 2 Power Receptor Connect the supplied power adapter. 3 LAN (PoE) Port Connect to a Power over Ethernet (PoE) switch or…

3. Basic Installationp. 8

   Basic Installation Hardware Setup To power on the DAP-2662, you can use ONE of the following methods: 1. Plug one end of your Ethernet cable into the LAN port…

4. Setup Wizardp. 10

   Setup Wizard The first login instance displays the System Settings window which requires a change in password. Additional settings include the System Time and…

5. Web User Interfacep. 11

   Web User Interface The DAP-2662 supports an elaborate web user interface where the user can configure and monitor the device. Launch a web browser, type in…

6. Knowledge Basep. 89

   Knowledge Base D-Link wireless products are based on industry standards to provide high-speed wireless connectivity that is easy to use within your home…

7. Troubleshootingp. 91

   Troubleshooting When entering the IP address of the D-Link access point (192.168.0.50 for example), you are not connecting to a website on the Internet or have…

8. Technical Specificationsp. 94
9. Antenna Patternp. 95

   Antenna Pattern Antenna Patterns Orientation H-Plane E-Plane 2.4 GHz Ceiling Mounted 2.4 GHz Wall Mounted 5 GHz Ceiling Mounted 5 GHz Wall Mounted Z Y X Wall…