Dell P2724DEB (DELL-P2724DEB) service manual

Contents

1. 页 1p. 1

   Version: 01 Date: 2023/10/18 Service Manual - P2724DEB

2. 页 2p. 2

   This product is certificated to meet RoHS Directive and Lead-Free produced definition. Using approved critical components only is recommended when the…

3. 页 3p. 3

   2. Exploded view diagram with list of items 1. Go to https://www.dell.com/support. 3. Click Contact Us next to the country dropdown. 2. Verify your country or…

4. 页 4p. 4
5. 页 5p. 5

   4. How to connect and disconnect power cable/ connectivity cable WARNING: To change power cable/ connectivity cable, switch off power before unplugging the…

6. 页 6p. 6
7. 页 7p. 7
8. 页 8p. 8

   5. Disassembly and Assembly Procedures 5.1 Disassembly Procedures: - Screwdriver(Phillip head) #2 - Screwdriver(Phillip head) #1 - Soldering iron and absorber…

9. 页 9p. 9

   5. Disassembly and Assembly Procedures S10 S9 S11 S12 S8 S7 Disconnect the panel lamp cable away from the interface board and panel module, then tear off the…

10. 页 10p. 10

    5. Disassembly and Assembly Procedures S15 S14 Lift up the middle bezel away from the pane module, then put it on a cushion foam for later disassembling.…

11. 页 11p. 11

    5. Disassembly and Assembly Procedures No.2~8 screw size=M4x8, Torque=7.5±0.5kgfxcm) Use a Philips-head screwdriver to remove 8pcs screws for interface board…

12. 页 12p. 12

    5. Disassembly and Assembly Procedures Turn over a power board and put the power board into the bracket chassis, settle the panel power cable to the correct…

13. 页 13p. 13

    5. Disassembly and Assembly Procedures S8 S10 S7 Tear off the release paper on the back of the touch cable and then fix the cable on the back of the panel.…

14. 页 14p. 14

    5. Disassembly and Assembly Procedures S12 (No.1~4 Screw size= M3x8, Torque=6±0.5kgfxcm) Use a Philips-head screwdriver to tighten 4pcs screws for locking the…

15. 页 15p. 15

    5. Disassembly and Assembly Procedures connect the touch cable to the connector of the interface board, then paste 2pcs aluminum foil on the specific positions…

16. 页 16p. 16

    5. Disassembly and Assembly Procedures Insert a DP out Cap into the DP out connector. Take a stand base close to the monitor. Fit the two tabs on the upper…

17. 页 17p. 17

    6. Trouble Shooting Instructions Troubleshooting WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. Self-test…

18. 页 18p. 18

    6. Trouble Shooting Instructions Built-in diagnostics Your monitor has a built-in diagnostic tool that helps you determine if the screen abnormality you are…

19. 页 19p. 19

    6. Trouble Shooting Instructions Common Problems The following table contains general information about common monitor problems you might encounter and the…

20. 页 20p. 20

    6. Trouble Shooting Instructions Common Symptoms What you experience Possible solutions Intermittent Problems Monitor malfunctions on & oȸ • Ensure that the…

21. 页 21p. 21

    6. Trouble Shooting Instructions Product speciȶc problems Problem What you experience Possible solutions Screen image is too small Image is centered on screen…

22. 页 22p. 22

    6. Trouble Shooting Instructions Problem What you experience Possible solutions No charging when using USB Type-C connection to computer, laptop, and so on No…

23. 页 23p. 23
24. 页 24p. 24
25. 页 25p. 25
26. 页 26p. 26
27. 页 27p. 27
28. 页 28p. 28
29. 页 29p. 29
30. 页 30p. 30