iiyama X2483HSU-B3 user manual

Contents

1. FOR YOUR SAFETYp. 5

   FOR YOUR SAFETY WARNING STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug…

2. SPECIAL NOTES ON LCD MONITORSp. 7

   NOTE If you have to return your unit for service and the original packaging has been discarded, please contact your dealer or iiyama service center for…

3. INSTALLATIONp. 9

   < WALL MOUNTING > WARNING Before installation, make sure the wall, ceiling or desktop arm is strong enough to hold the necessary weight of the display and…

4. FITTING AND REMOVAL OF BASE : ProLite XB2483HSUp. 11

   CAUTION  Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped.  Do not give a strong impact to the monitor.…

5. FITTING AND REMOVAL OF BASE : ProLite X2483HSUp. 12
6. CONTROLS AND CONNECTORS : ProLite X2483HSUp. 14

   <Front> <Back> Power Indicator Blue: Normal operation Orange: Power Management Power Switch ( ) Menu / Select Button (ENTER) Scroll Up / Volume Button ( / )…

7. CONNECTING YOUR MONITOR : ProLite XB2483HSUp. 15

   Ensure that both the computer and the monitor are switched off . Connect the computer to the monitor with the signal cable. Connect the monitor to the audio…

8. CONNECTING YOUR MONITOR : ProLite X2483HSUp. 16
9. COMPUTER SETTINGp. 17

    For optimal viewing it is recommended to look at the full face of the monitor.  Hold the stand so that the monitor does not topple when you change the…

10. ADJUSTING THE VIEWING ANGLE : ProLite X2483HSUp. 17

    NOTE  Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.  Careful attention is required not to pinch your fi…

11. OPERATING THE MONITORp. 19

    OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 32. You are…

12. ADJUSTMENT MENU CONTENTSp. 20

    Adjustment Item Problem / Option Button to Press Picture Adjust * 3 Too dark Too bright Brightness * 1,2,4 Contrast * 2 Too dull Too intense * 1 Adjust the…

13. SCREEN ADJUSTMENTSp. 27

     The screen adjustments described in this manual are designed to set image position and minimize fl icker or blur for the particular computer in use.  The…

14. POWER MANAGEMENT FEATUREp. 30

    may not work properly. NOTE POWER MANAGEMENT FEATURE Power Management Mode When the H-sync signal / V-sync signal / H and V sync signals from the computer…

15. TROUBLE SHOOTINGp. 31

    TROUBLE SHOOTING 1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip…

16. RECYCLING INFORMATIONp. 32

    The screen is shaking. The power voltage is within the specifi cation of the monitor. The signal timing of the computer is within the specifi cation of the…

17. APPENDIXp. 33

    APPENDIX Design and specifi cations are subject to change without prior notice

18. SPECIFICATIONS : ProLite XB2483HSUp. 33

    * Audio/USB equipment is not connected. NOTE Size Category 24" LCD Panel Panel technology AMVA Size Diagonal: 23.8" (60.5cm) Pixel pitch 0.275mm H × 0.275mm V…

19. SPECIFICATIONS : ProLite X2483HSUp. 34
20. DIMENSIONS : ProLite XB2483HSUp. 35

    528.5mm/20.8” 552.5mm/21.8” 298.0mm/11.7” 334.0mm/13.1” 56.5mm/2.2” 373.0mm/14.7”(503.0mm/19.8”) 240.0mm/9.4” 210.0mm/8.3” 379.5mm/14.9” 552.5mm/21.8”…

21. DIMENSIONS : ProLite X2483HSUp. 35
22. COMPLIANT TIMINGp. 36

    * 1 HDMI/DisplayPort input only. * 2 Analog input only. NOTE Video Mode Horizontal Frequency Vertical Frequency Dot Clock 640 × 480 31.469kHz 59.940Hz…