Hannspree 27P2C user manual

Contents

1. Safetyp. 3

   National Conventions The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide…

2. National Conventionsp. 3

   The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be…

3. Powerp. 4

   The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home…

4. Installationp. 5

   Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this…

5. Cleaningp. 6

   Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet.…

6. Otherp. 7

   If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center. Make sure that the ventilating…

7. Setupp. 8

   Contents in Box * * * * CD Manual Power Cable DP Cable HDMI Cable Warranty Card Stand Monitor Base * * Audio Cable USB Cable Not all signal cables will be…

8. Setup Stand & Basep. 9

   Please setup or remove the base following the steps as below. Setup: 4 Remove: 4

9. Adjusting Viewing Anglep. 10

   For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. Hold the stand so you…

10. Connecting the Monitorp. 11
11. Adaptive-Sync functionp. 12

    1. Adaptive-Sync function is working with DP/HDMI 2. Compatible Graphics Card: Recommend list is as the below, also could be checked by visiting www.AMD.com •…

12. Adjustingp. 13

    Hotkeys 1 2 3 4 5 1 Source/Exit 2 Clear Vision/< 3 Volume/> 4 Menu/Enter 5 Power Power Press the Power button to turn on the monitor. Menu/Enter When there is…

13. Hotkeysp. 13

    2 3 4 5 1 Source/Exit 2 Clear Vision/< 3 Volume/> 4 Menu/Enter 5 Power Power Press the Power button to turn on the monitor. Menu/Enter When there is no OSD…

14. OSD Settingp. 15

    Basic and simple instruction on the control keys. Luminance Color Setup Picture Boost OSD Setup Game Setting Exit Extra Contrast 50 Brightness 90 Eco mode…

15. LED Indicatorp. 23

    Status LED Color Full Power Mode White Active-off Mode Orange

16. Troubleshootp. 24

    Problem & Question Possible Solutions Power LED Is Not ON Make sure the power button is ON and the Power Cord is properly connected to a grounded power outlet…

17. Specificationp. 25

    General Specification Panel Model name 27P2C Driving system TFT Color LCD Viewable Image Size 68.5 cm diagonal Pixel pitch 0.3114mm(H) x 0.3114mm(V) Display…

18. General Specificationp. 25

    Panel Model name 27P2C Driving system TFT Color LCD Viewable Image Size 68.5 cm diagonal Pixel pitch 0.3114mm(H) x 0.3114mm(V) Display Color 16.7M Colors…

19. Preset Display Modesp. 26
20. Pin Assignmentsp. 27

    19-Pin Color Display Signal Cable Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name 1. TMDS Data 2+ 9. TMDS Data 0- 17. DDC/CEC Ground 2. TMDS Data 2…

21. Plug and Playp. 28

    Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host…