D-Link DMC-515SC Media Converters (DMC-515SC/E) user manual

Contents

1. INTRODUCTIONp. 3

   Thank you for choosing the 10/100BASE Fast Ethernet Media Converter, The Converter introduced here provides one channel media conversion between 10/100BASE-TX…

2. ABOUT MEDIA CONVERTERp. 3

   The Media Converter is a network technology specified by IEEE 802.3 10BASE-T, IEEE802.3u 100BASE-TX, 100BASE-FX standards

3. PRODUCT FEATURESp. 3

   
   One-channel media conversion between 10/100BASE-TX and 100BASE-FX
   Fiber media allows: multi-mode fiber using SC, LC or MT-RJ connector; single-mode fiber…

4. INSTALLATIONp. 4

   This chapter gives step-by-step installation instructions for the Converter

5. SELECTING A SITE FOR THE EQUIPMENTp. 4

   As with any electric device, you should place the equipment where it will not be subjected to extreme temperatures, humidity, or electromagnetic interference.…

6. CONNECTING TO POWERp. 5

   1. This Converter is a plug-and-play device. 2. Connect the supplied AC to DC power adaptor with a power voltage of 7.5Vdc/1.5Amp to the receptacle on the rear…

7. SLIDING SWITCHp. 5

   There is a sliding switch for duplex mode setting for fiber port. Refer to the table below for more details. Half Duplex Full Duplex (default)

8. CONNECTING TO POWERp. 6

   3. This Converter is a plug-and-play device. 4. Connect the supplied AC to DC power adaptor with a power voltage of 7.5Vdc/1.5Amp to the DC-Jack on the…

9. INSTALLING IN A CHASSISp. 6

   The Converter can be fit into any of the expansion slots on a special designed chassis.  First, install the converter onto a carrier supplied with the…

10. LED INDICATORp. 7

    The LED indicators give you instant feedback on status of the converter: LEDs State Indication Steady Power on Power (PWR) Off Power off Steady Runs at 100Mbps…

11. SPECIFICATIONSp. 8

    Applicable Standards IEEE 802.3 10BASE-T IEEE802.3u 100BASE-TX & 100BASE-FX Fixed Ports 1 TX port, 1 FX port Speed 10/20Mbps for half/full-duplex 100/200Mbps…