Hannspree U28G2AE/BK user manual

Contents

1. Safetyp. 3

   National Conventions The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide…

2. National Conventionsp. 3

   The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be…

3. Powerp. 4

   The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home…

4. Installationp. 5

   Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this…

5. Cleaningp. 6

   Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet.…

6. Otherp. 7

   If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center. Make sure that the ventilating…

7. Setupp. 8

   Contents in Box * Monitor CD Manual Warranty Card Stand Base Power Cable HDMI Cable DP Cable * * * * Audio Cable Not all signal cables will be provided for all…

8. Setup Stand & Basep. 9

   Please setup or remove the base following the steps as below. Setup: Remove:

9. Adjusting Viewing Anglep. 10

   For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. Hold the stand so you…

10. Connecting the Monitorp. 11

    Cable Connections In Back of Monitor and Computer: 1 2 3 4 5 1. Power 2. DP 3. HDMI-1 4. HDMI-2 5. Earphone Connect to PC 1. Connect the power cord to the back…

11. Adjustingp. 12

    Hotkeys 1 2 3 4 5 1 Source/Exit 2 Game Mode/< 3 Dial Point/> 4 Menu/Enter 5 Power Power Press the power key to turn on/off the monitor. Menu/Select Activate…

12. Hotkeysp. 12

    2 3 4 5 1 Source/Exit 2 Game Mode/< 3 Dial Point/> 4 Menu/Enter 5 Power Power Press the power key to turn on/off the monitor. Menu/Select Activate the OSD menu…

13. OSD Settingp. 13

    Basic and simple instruction on the control keys. Luminance Color Setup Picture Boost OSD Setup Exit Extra Contrast 50 Brightness 90 Eco Mode Standard Gamma…

14. LED Indicatorp. 23

    Status LED Color Full Power Mode White Active-off Mode Orange

15. Troubleshootp. 24

    Problem & Question Possible Solutions Power LED Is Not ON Make sure the power button is ON and the Power Cord is properly connected to a grounded power outlet…

16. Specificationp. 25

    General Specification Panel Model name U28G2AE Driving system TFT Color LCD Viewable Image Size 70.9 cm diagonal Pixel pitch 0.16mm(H) x 0.16mm(V) Others…

17. General Specificationp. 25

    Panel Model name U28G2AE Driving system TFT Color LCD Viewable Image Size 70.9 cm diagonal Pixel pitch 0.16mm(H) x 0.16mm(V) Others Horizontal scan range…

18. Preset Display Modesp. 26
19. Pin Assignmentsp. 27

    19-Pin Color Display Signal Cable Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name 1. TMDS Data 2+ 9. TMDS Data 0- 17. DDC/CEC Ground 2. TMDS Data 2…

20. Plug and Playp. 28

    Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host…