StarTech.com 4-Bay Mobile Rack Backplane for 2.5in SATA/SAS Drives (SATSASBP425) user manual

Contents

1. Product Diagramp. 4
2. Front Viewp. 4

   Rear View 1. 4x 2.5” Drive bays/trays 2. 4x 2.5” Drive bay key hole 3. 4x Drive Tray Release Latches 1. 2x Drive power connector ports (LP4) 2. 4x SATA data…

3. Rear Viewp. 4

   1. 4x 2.5” Drive bays/trays 2. 4x 2.5” Drive bay key hole 3. 4x Drive Tray Release Latches 1. 2x Drive power connector ports (LP4) 2. 4x SATA data connector…

4. Introductionp. 5

   Packaging Contents • 1x 4-Bay 2.5in SATA/SAS Hard Drive Backplane • 2x Drive bay keys • 4x 2.5” HDD/SSD Drive Trays • 4x SATA cables • 2x SATA to Molex Power…

5. System Requirementsp. 5

   1x - Computer System with: • 4x SATA/SAS host connector ports • Available 5.25” bay • 2x - Available SATA or LP4 Power Connections • Up to 4x - 2.5in SATA/SAS…

6. Installationp. 6

   Hardware Installation 1. Ensure your computer system is powered down, and the power cable has been disconnected from the Power Supply. 2. Open your computer…

7. Hardware Installationp. 6

   1. Ensure your computer system is powered down, and the power cable has been disconnected from the Power Supply. 2. Open your computer case (refer to the…

8. Hard Drive Installationp. 7

   1. Insert either of the included bay keys into the your desired 2.5in Drive bay key holes depending on which tray you intend to install the drive into. And…

9. Hard Drive Removalp. 9

   1. Insert either of the included bay keys into the “2.5in Drive bay key holes depending on which type of drive you intend to remove. And Turn the key clockwise…

10. How to Usep. 10

    Connecting the Hard Drive Once the drive has been installed in the drive bay, the drivers will install automatically, and the inserted drive will be accessible…

11. Connecting the Hard Drivep. 10

    Once the drive has been installed in the drive bay, the drivers will install automatically, and the inserted drive will be accessible as though it were…

12. Disconnecting the Hard Drivep. 10

    Windows The drive should be uninstalled from device manager, or unmounted using third party hot swap software. Note: Removing the connected drive while it is…

13. Initializing the Hard Drivep. 10

    Disconnecting the Hard Drive Windows The drive should be uninstalled from device manager, or unmounted using third party hot swap software. Note: Removing the…

14. Technical Supportp. 12

    StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product…

15. Warranty Informationp. 12

    This product is backed by a two year warranty. In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods…