StarTech.com Quad-Monitor Desktop Stand (ARMBARQUAD) user manual

Contents

1. Introductionp. 5

   Product diagram Lower pole Upper pole Crossbar Cable-management clip Cable-management clips Pole connector Cable-management clips Cable-management clip…

2. Product diagramp. 5

   Lower pole Upper pole Crossbar Cable-management clip Cable-management clips Pole connector Cable-management clips Cable-management clip Baseplate Crossbar VESA…

3. Technical specificationsp. 6

   Type of measurement Measurement VESA mounting hole pattern 75x75 100x100 Weight capacity Up to 8 kg (17.6 lb.) per monitor mount Tilt +450 to -450 Screen size…

4. Requirementsp. 9

   Four monitors or displays that are compatible with one of the mounting hole patterns that ARMBARQUAD supports • A Phillips screwdriver Requirements are subject…

5. Assemblyp. 10

   Warning! Make sure that the combined weight of the monitors does not exceed the weight capacity of this product. If you exceed the weight capacity, you might…

6. Assemble the lower polep. 10

   1. Thread the cable-management clip onto the pole. 2. Thread the cap onto the pole. 3. Screw the pole into the baseplate. (figure 1) 4. Use the 3 mm hex key to…

7. Attach a crossbarp. 11

   1. Use the 3 mm hex key to loosen the screw in the side of the collar on the lower pole, and raise or lower the collar on the pole. 2. When the collar is at…

8. Attach the upper polep. 12

   1. Screw the pole connector onto the lower pole. 2. Thread the other cable-management clip onto the upper pole. 3. Screw the upper pole into the pole…

9. Attach the second crossbarp. 13
10. Attach monitors to the crossbarsp. 15

    Warning! Attaching the monitors is a two-person job. Do not attempt to complete this task by yourself. Tipping hazard! The ARMBARQUAD is free-standing and when…

11. Adjust the tilt angle of your monitorp. 19

    1. To change the angle that the monitor is tilted at, use the 6 mm hex key to loosen the screw in the side of the VESA monitor mount. 2. Position the monitor…

12. Tipping hazard warningp. 20

    Warning! The most stable configuration of the ARMBARQUAD is in the “flat” position, with each set of monitors positioned in a straight line. Depending upon the…

13. Adjust the vertical position of the monitorsp. 20

    To make adjustments to the position of the monitors, use the 5 mm hex key to adjust the screw in the top of the VESA monitor mounts. figure 19 360° 360° 5 mm…

14. Technical supportp. 22

    StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product…

15. Warranty informationp. 22

    This product is backed by a five-year warranty. StarTech.com warrants its products against defects in materials and workmanship for the periods noted…