StarTech.com Low-Profile TV Wall Mount - Tilting (FPWTLTBAT) user manual

Contents

1. Advertencias de usop. 3

   Asegúrese de ensamblar este producto según las instrucciones. De lo contrario, pueden producirse lesiones personales o daños en la propiedad. Asegúrese de que…

2. Introductionp. 5

   Product dimensions min 300 mm to max 810 mm 248 mm 29 mm 51 mm (depth) +5° -10° 985 mm min 75 mm to max 404 mm 440 mm

3. Product dimensionsp. 5

   min 300 mm to max 810 mm 248 mm 29 mm 51 mm (depth) +5° -10° 985 mm min 75 mm to max 404 mm 440 mm

4. Product diagramp. 5

   Level Wall mount Decorative cover Decorative cover Left adapter bracket Right adapter bracket Safety bar

5. Technical specificationsp. 6

   Unless otherwise indicated, the technical specifications in the table below apply to the TV or display. Type of measurement Measurement VESA mounting hole…

6. Requirementsp. 10

   A display or TV that is compatible with one of the VESA mounting hole patterns FPWTLTBAT supports • A Phillips screwdriver • A padlock if you want to secure…

7. Installationp. 11

   Attach the decorative covers 1. Place a decorative cover over one end of the wall mount. 2. On the back of the wall mount, insert a decorative cover screw…

8. Attach the decorative coversp. 11

   1. Place a decorative cover over one end of the wall mount. 2. On the back of the wall mount, insert a decorative cover screw through the top hole in the wall…

9. Attach the wall mount to the wallp. 12

   Warning! The wall mount is designed to be installed on a wood stud, solid concrete, or cinder block wall. The wall structure should be capable of supporting at…

10. Attach the adapter brackets to a flush mounting surfacep. 14

    To accommodate different TV designs, the FPWTLTBAT comes with five sets of screws of different lengths and diameters, washers with two hole sizes, and two…

11. Attach the adapter brackets to a recessed mounting surfacep. 16
12. Hook the TV onto the wall mountp. 19

    Warning! Make sure that the weight of the TV doesn’t exceed the weight capacity of this product. If you exceed the weight capacity, you might experience…

13. Attach the safety barp. 20

    1. Slide the safety bar into the groove in the adapter brackets. (figure 10) figure 10 Safety bar Groove

14. Adjust the angle of the TVp. 21

    To adjust the angle of the TV, push or pull on the top or bottom of the TV. (figure 12) figure 12 2. To prevent someone from removing the safety bar, attach a…

15. Technical supportp. 22

    StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product…

16. Warranty informationp. 22

    This product is backed by a five-year warranty. StarTech.com warrants its products against defects in materials and workmanship for the periods noted…