Loading manual…
Loading manual…
The STNDTBLT1FS is a rugged and durable fixed-height tablet stand that you can use as a stand-alone kiosk or as an informational display. The tablet stand…
Tablet base dimensions
The STNDTBLT1FS is designed for 9.7 in. iPad, iPad Air, and iPad Pro tablets. • A USB charging cable at least 6 feet in length. • A Phillips screwdriver. • A…
Make sure that all of the hardware is assembled securely and checked for stability before you load the tablet into the tablet holder
1. Remove the plastic backing from the four rubber feet (7) and attach them to the base (3) in the areas indicated (figure 1). figure 1 Base Rubber foot
1. Place the connecting block (5) on top of the pole (6) so that the four holes on the connecting block line up with the four holes in the pole. 2. Insert the…
The tablet holder is designed for iPad, iPad Air, and iPad Pro tablets, however, you can use the foam pads and blocks in order to fit other types of tablets.…
To avoid scratching the surface of the tablet, handle the tablet carefully when you insert it into the tablet holder. The weight capacity of the STNDTBLT1FS is…
You can secure the STNDTBLT1FS to the floor or leave it as a free-standing tablet stand. To attach the tablet stand to the floor, complete the following: 1.…
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product…
This product is backed by a three-year warranty. StarTech.com warrants its products against defects in materials and workmanship for the periods noted…