StarTech.com Sit-to-Stand Workstation (ARMSTS) user manual

Contents

1. Product diagramp. 4

   Base Pneumatic arm Keyboard tray Keyboard tray backing Workstation Pneumatic arm lever

2. Product dimensionsp. 5

   mm (23.6 in.) 680 mm (26.8 in.) 400 mm (15.7 in.) 250 mm (9.8 in.) 500 mm (19.7 in.) 583 mm (22.95 in.) 500 mm (19.7 in.) 800 mm (31.5 in.) 856 mm (33.7 in.)…

3. Introductionp. 6

   You can use the ARMSTS to turn your workstation into a dual-functioning area that enables you to either sit or stand while you work. The height-adjustable…

4. Assemble the workstationp. 8

   Attach the pneumatic arm to the workstation 1. Line up the two holes on each of the brackets of the pneumatic arm (1) with four of the holes on the workstation…

5. Attach the pneumatic arm to the workstationp. 8

   1. Line up the two holes on each of the brackets of the pneumatic arm (1) with four of the holes on the workstation (5). 2. Use the M4*55 Allen wrench (12) to…

6. Attach the keyboard tray backing to the mounting pillarp. 9

   1. Line up the single hole on each side of the mounting pillar (7) with the corresponding holes on the keyboard tray backing (4). 2. Use the M4*55 Allen wrench…

7. Attach the pneumatic arm to the mounting pillarp. 10
8. Attach the back plate to the keyboard trayp. 11

   1. Line up the top four holes on the back plate (3) with the four holes on the keyboard tray (2) so that the bottom two holes on the back plate are hanging…

9. Attach the keyboard tray to the mounting pillarp. 12

   1. Affix the small pressure pads (8) onto the reverse side of the keyboard tray (2) in the areas indicated in the diagram. 2. Use the M4*55 Allen wrench (12)…

10. Affix the pressure pads to the basep. 13

    1. Affix the circular pressure pads (9) onto the underside of the base (6) in the areas indicated in the diagram. 9 6

11. Attach the basep. 14

    Warning! When you extend the pneumatic arm, keep your fingers clear of the pinch points on the pneumatic arm. 1. Press the pneumatic arm lever to extend the…

12. Convert the ARMSTS to a sitting or standing positionp. 15

    1. To convert the ARMSTS to a standing or sitting position, press the lever on the pneumatic arm. 2. To adjust the tension, move the arm to 45 degrees and do…

13. Weight restrictionsp. 17

    Warning! The weight limit for the ARMSTS is a total of 28.7 pounds and the total weight of the monitors and keyboard shouldn’t exceed that weight. The weight…

14. Technical supportp. 18

    StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product…

15. Warranty informationp. 18

    This product is backed by a two-year warranty. StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following…

Other documents for this model

• StarTech.com Sit-to-Stand Workstation (ARMSTS) user manual