D-Link Nuclias Connect Hub (DNH-100) user manual

Contents

1. Introductionp. 3

   Page 3 Introduction Nuclias Connect is D-Link’s centralized management solution for Small-to-Medium-Sized Business (SMB) networks. Nuclias Connect makes it…

2. Product Overviewp. 3

   Package Contents • DNH-100 Nuclias Connect Hub • Power Cord • Rack Mount Kit • Quick Start Guide • 16 Gb MicroSD Card (Optional*)

3. System Requirementsp. 3

   Computers with Windows®, Macintosh®, or Linux-based operating systems with an installed Ethernet Adapter • Microsoft Edge, Safari 7, Firefox 28, or Google…

4. Hardware Overviewp. 4

   Page 4 Hardware Overview

5. LED Indicatorsp. 4

   # LED Description 1 Power Solid Green - The device is powered on and ready for use, and it is in standalone mode. Blinking Green - The device is booting up.…

6. Interface Connectorsp. 4

   # Connector Description 1 Reset Used for rebooting or resetting the device back to factory default settings. 2 Console Port RJ-45 port to connect the RJ-45…

7. Installationp. 5
8. Mountingp. 5

   The DNH-100 can be mounted in an EIA standard size 19-inch rack, which can be placed in wiring closet with other equipment. 1. Attach the L-shaped mounting…

9. Connecting the Controllerp. 6

   LAN DHCP Server Nuclias ConnectAPs Management Computer

10. Basic Configurationp. 7
11. Launch Nuclias Connectp. 7

    The DNH-100 comes preloaded with Nuclias Connect. Open a web browser from the management computer and enter the IP address or Domain Name of the DNH-100. The…

12. Nuclias Connect Configurationp. 9
13. Wizardp. 9

    Nuclias Connect Configuration A wizard is available to guide you through first-time setup of the device. If at any time you wish to re-run the wizard you can…

14. Dashboardp. 12

    After successfully logging into the server, the Dashboard page will appear. A summary of information of all connected access points and wireless clients is…

15. Monitorp. 13

    > Access Points in the menu, the Usage and Total Access Points frames will appear. On this frame, you can view a report of all or a selected number wireless…

16. Configurationp. 16

    Page 16 Configuration Create Profile The Create Profile function allows for the creation of new sites and networks. After clicking on Configuration > Create…

17. Reportp. 39

    Peak Network Activity The Peak Network Activity function allows administrators to monitor wireless traffic on the network. Wireless activity for all or…

18. Logp. 43

    SNMP Traps The SNMP Traps function allows administrators to view alert messages when events concerning network devices occur. Navigate to Log > SNMP Traps to…

19. Systemp. 47

    Device Management The Device Management function allows user to view list of all devices on the network both managed and unmanaged devices. Navigate to Log >…

20. Appendixp. 62
21. Nuclias Connect Appp. 62

    Through the use of the Nuclias Connect App, users can manage sites and network remotely and easily by accessing the tool through a smart device. This section…