D-Link Wireless AC2300 Wave2 Dual-Band PoE Acess Point (DAP-2682) user manual

Contents

1. Nuclias Connectp. 4

   Introduction Nuclias Connect is D-Link’s centralized management solution for Small-to-Medium-Sized Business (SMB) networks. Nuclias Connect makes it easier to…

2. Hardware Overviewp. 7

   LEDs Connections 2 Power Receptor Connect the supplied power adapter. (*Note: no longer used, replaced by PoE) 3 LAN (PoE) Port Connect to a Power over…

3. Basic Installationp. 8

   Hardware Setup To power on the DAP-2682, you can use ONE of the following methods: 1. Plug one end of your Ethernet cable into the LAN port of the DAP-2682…

4. Setup Wizardp. 9

   The first login instance displays the System Settings window which requires a change in password. Additional settings include the System Time and System…

5. Web User Interfacep. 10

   The DAP-2682 supports an elaborate web user interface where the user can configure and monitor the device. Launch a web browser, type dap2680.local in the…

6. Technical Specificationsp. 86
7. Antenna Patternp. 87

   Orientation H-Plane E-Plane 2.4GHz Ceiling Mounted 2.4GHz Wall Mounted

8. Warrantyp. 89

   Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited Warranty: • Only to the person or entity that…

9. Power Usagep. 96

   This device is an Energy Related Product (ErP) with High Network Availability (HiNA), and automatically switches to a power-saving Network Standby mode within…

10. Registrationp. 97

    Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Registration