AOC U27P2 user manual

Contents

1. Safetyp. 3

   National Conventions The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide…

2. National Conventionsp. 3

   The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be…

3. Powerp. 4

   The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home…

4. Installationp. 5

   Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this…

5. Cleaningp. 6

   Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet.…

6. Otherp. 7

   If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center. Make sure that the ventilating…

7. Setupp. 8

   Contents in Box * * * * * * * * CD Manual Warranty card Stand Monitor Base Power Cable Audio Cable DVI Cable VGA Cable HDMI Cable DP Cable USB Cable Not all…

8. Setup Stand & Basep. 9

   Please setup or remove the base following the steps as below. Setup: 4 Remove: 4

9. Adjusting Viewing Anglep. 10

   For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. Hold the stand so you…

10. Connecting the Monitorp. 11
11. Wall Mountingp. 12

    Preparing to Install An Optional Wall Mounting Arm. 4 This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this…

12. Adaptive-Sync functionp. 13

    1. Adaptive-Sync function is working with DP/HDMI 2. Compatible Graphics Card: Recommend list is as the below, also could be checked by visiting www.AMD.com •…

13. Adjustingp. 14

    Hotkeys 1 2 3 4 5 1 Source/Exit 2 Clear Vision/< 3 Volume/> 4 Menu/Enter 5 Power Menu/Enter When there is no OSD, Press to display the OSD or confirm the…

14. Hotkeysp. 14

    2 3 4 5 1 Source/Exit 2 Clear Vision/< 3 Volume/> 4 Menu/Enter 5 Power Menu/Enter When there is no OSD, Press to display the OSD or confirm the selection.…

15. OSD Settingp. 16

    Basic and simple instruction on the control keys. Luminance Color Setup Picture Boost OSD Setup Exit Extra Contrast 50 Brightness 90 Eco mode Standard Gamma…

16. LED Indicatorp. 25

    Status LED Color Full Power Mode White Active-off Mode Orange

17. Troubleshootp. 26

    Problem & Question Possible Solutions Power LED Is Not ON Make sure the power button is ON and the Power Cord is properly connected to a grounded power outlet…

18. Specificationp. 27

    General Specification Panel Model name U27P2 Driving system TFT Color LCD Viewable Image Size 68.47cm diagonal Pixel pitch 0.1554(H) x 0.1554mm(V) Video HDMI…

19. General Specificationp. 27

    Panel Model name U27P2 Driving system TFT Color LCD Viewable Image Size 68.47cm diagonal Pixel pitch 0.1554(H) x 0.1554mm(V) Video HDMI Interface & DP…

20. Preset Display Modesp. 28
21. Pin Assignmentsp. 29

    15-Pin Color Display Signal Cable Pin No. Signal Name Pin No. Signal Name 1. Video-Red 9 +5V 2. Video-Green 10 Ground 3. Video-Blue 11 N.C. 4. N.C. 12…

22. Plug and Playp. 31

    Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host…