StarTech.com Monitor Wall Mount (ARMWALL) user manual

Contents

1. Introductionp. 5

   Product diagram Display mount Mounting plate 90° +45° -45°

2. Product diagramp. 5

   Display mount Mounting plate 90° +45° -45°

3. Technical specificationsp. 6

   Type of measurement Measurement VESA mounting hole pattern 50x50 75x75 100x100 Rated load Up to 15 kg (33 lb.) Tilt +450 to -450 Screen size Between 330 mm and…

4. Requirementsp. 8

   A monitor or display that is compatible with one of the VESA mounting hole patterns that ARMWALL supports • A Phillips screwdriver Requirements are subject to…

5. Installationp. 9

   Attach the display mount to a wall Warning! Wall structures vary, and it is important that you make sure that the type of structure and mounting hardware that…

6. Attach the display mount to a wallp. 9

   Warning! Wall structures vary, and it is important that you make sure that the type of structure and mounting hardware that you are using will properly support…

7. Attach a monitor to the display mountp. 10

   To accommodate different monitor sizes, the ARMWALL comes with two sets of screws that are different lengths and diameters. To select the appropriate screws…

8. Adjust the tilt tensionp. 12

   1. Use the hex key to prevent the screw on the display mount from moving as you tighten the nut. 2. Use the wrench to tighten the nut on the side of the…

9. Attach the display mount to the mounting platep. 13

   Warning! Attaching the monitor is a two-person job. Do not attempt to complete this task by yourself. 1. Carefully pick up the display mount with the monitor…

10. Technical supportp. 14

    StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product…

11. Warranty informationp. 14

    This product is backed by a five-year warranty. StarTech.com warrants its products against defects in materials and workmanship for the periods noted…