StarTech.com Triple-Monitor Desktop Stand (ARMBARTRIO2) user manual

Contents

1. Product diagramp. 5

   VESA monitor mount Crossbar Pole VESA monitor mount VESA monitor mount Left monitor arm Right monitor arm Baseplate

2. Product dimensionsp. 5

   1412 mm (55.6 in.) 1330 mm (52.4 in.) 35 mm (1.4 in.) 463 mm (18.2 in.) 520 mm (20.5 in.) 300 mm (11.8 in.) 100 mm (3.9 in.) 75 mm (2.9 in.)

3. Technical specificationsp. 6

   Type of measurement Measurement VESA 75x75 100x100 RATED LOAD 17.6 lb. (8 kg) per monitor ROTATION 3600 TILT -300 to +300 SCREEN Up to 686 mm (27 in.) SWIVEL…

4. Requirementsp. 9

   Three monitors that are compatible with one of the VESA mounting hole patterns that ARMBARTRIO2 supports • A Phillips type screwdriver Requirements are subject…

5. Assembling the triple-monitor standp. 10

   Assemble the base 1. Screw the pole into the baseplate. (figure 1) figure 1 2. Use the 3 mm hex key to tighten the set screws to secure the pole to the…

6. Assemble the basep. 10

   1. Screw the pole into the baseplate. (figure 1) figure 1 2. Use the 3 mm hex key to tighten the set screws to secure the pole to the baseplate. (figure 2)…

7. Attach a monitor to the crossbarp. 11

   Warning! Make sure that the weight of the monitor that you attach to the crossbar does not exceed the weight capacity of this product. If you exceed the weight…

8. Attach the VESA monitor mountsp. 12

   Warning! Make sure that the weight of the monitors that you are using does not exceed the weight capacity of this product. If you exceed the weight capacity…

9. Attach the monitors to the monitor armsp. 13

   1. Slide the left monitor arm through the VESA monitor mount attached to one of the monitors. 2. Slide the right monitor arm through the VESA monitor mount…

10. Attach the crossbar and monitor armsp. 15

    Warning! Attaching the crossbar and monitor arms is a two-person job. Do not attempt to complete this task by yourself. 1. Use the 3 mm hex key to loosen the…

11. Attach the cable-management clipsp. 18

    1. Snap the four cable-management clips over both of the monitor arms and the crossbar. (figure 14) Cable-management clip figure 14 2. Route the monitor cables…

12. Adjust the position of the monitorsp. 19

    Tipping hazard warning Warning! The most stable configuration of the ARMBARTRIO2 is in the “flat” position with all three of the monitors positioned in a…

13. Tipping hazard warningp. 19

    Warning! The most stable configuration of the ARMBARTRIO2 is in the “flat” position with all three of the monitors positioned in a straight line. ARMBARTRIO2…

14. Technical supportp. 23

    StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product…

15. Warranty informationp. 23

    This product is backed by a five-year warranty. StarTech.com warrants its products against defects in materials and workmanship for the periods noted…